Brother International SE-400 Users Manual - English - Page 100
Appliqué stitching
View all Brother International SE-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
UTILITY STITCHES Appliqué stitching Cut out the appliqué, leaving a seam a allowance of between 3 and 5 mm (1/8 and 3/ 16 inch). Select a stitch. e • For details, refer to "Selecting stitching" (page 49). a a Seam allowance Place a pattern made of thick paper or b stabilizer on the back of the appliqué, and then fold over the seam allowance using an iron. Turn the handwheel toward you f (counterclockwise), and then begin sewing around the edge of the appliqué, making sure that the needle drops just outside of the appliqué. Turn the fabric over, and then baste or fuse it c onto the fabric that it will be attached to. 1 a Basting stitching Attach zigzag foot "J". d J • For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43). When sewing around corners, stop the machine with the needle in the fabric just outside of the appliqué, raise the presser foot lever, and then turn the fabric as needed to change the sewing direction. 98