Brother International SE-400 Users Manual - English - Page 45
Replacing the Presser Foot - embroidery designs
View all Brother International SE-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Replacing the Presser Foot This section describes how to replace the presser foot. Presser foot precautions 1 Be sure to observe the following precautions concerning the presser foot. CAUTION ● Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. ● Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may result in injuries or damage to the machine. Replacing the presser foot Replace the presser foot as described below. Memo z For details on attaching the embroidery foot "Q", refer to "Attaching the Embroidery Foot" (page 120). z Zigzag foot "J" is already installed when the sewing machine is purchased. Press (Needle position button) once or a twice to raise the needle. a CAUTION z Before replacing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing. Raise the presser foot lever. c a a Needle position button Turn off the sewing machine. b a Presser foot lever X The presser foot is raised. Press the black button at the back of the d presser foot holder. a b a Black button b Presser foot holder X The presser foot holder releases the presser foot. Replacing the Presser Foot 43