Brother International SE-400 Users Manual - English - Page 64
Automatically cutting, the thread
View all Brother International SE-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
SEWING BASICS Memo z Press (Start/stop button) when you want to stop the sewing machine in the middle of sewing without reverse stitching or reinforcement stitching (for example, when you want to change the sewing direction). The sewing machine stops without reverse stitching or reinforcement stitching. Press (Reverse/reinforcement stitch button) at the end of the stitching. Press the stitch selection. b • For details on selecting a stitch, refer to "Selecting stitching" (page 49). Press c on the screen. 1 2a 4 3b X You get , and the sewing machine is set for programmed thread-cutting and automatic reverse/reinforcement stitching. a Stop the machine and change the sewing direction. b Start the machine again. Automatically cutting the thread The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called "programmed thread-cutting". If programmed thread-cutting is set, automatic reverse/reinforcement stitching is also set. Turn on the machine. a Memo z To turn programmed thread cutting off, press . Position the fabric under the presser foot, and d then press (Start/stop button) once. X The LCD comes on. a a Start/stop button X Stitching starts after reverse stitching or reinforcement stitching. 62