Brother International SE-400 Users Manual - English - Page 78
Sewing overcasting stitches using the optional side cutter
View all Brother International SE-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
UTILITY STITCHES Sewing overcasting stitches using the optional side cutter Using the optional side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five stitches can be used to sew overcasting stitches with the side cutter. Stitch Name Pattern Application 63 64 65 Side cutter 66 67 Sewing straight stitches while cutting the fabric Sewing zigzag stitches while cutting the fabric Preventing fraying in thin and mediumweight fabrics while cutting the fabric Preventing fraying in thick fabrics while cutting the fabric Preventing fraying in thick fabrics while cutting the fabric Stitch Width [mm (inch)] Auto Manual 0.0 0.0-2.5 (0) (0-3/32) 3.5 (1/8) 3.5-5.0 (1/8-3/16) 5.0 (3/16) Stitch Length [mm (inch)] Auto Manual 2.5 0.2-5.0 (3/32) (1/64-3/16) Presser Foot 1.4 0.0-4.0 (1/16) (0-3/16) 2.0 (1/16) S 2.5 (3/32) 1.0-4.0 (1/16-3/16) CAUTION ● Be sure to turn off the main power before replacing the pressor foot. Otherwise, injuries may occur if (Start/stop button) is accidentally pressed and the machine starts sewing. Position the side cutter so that side cutter pin c is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever. Note z Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the needle threader. Remove the presser foot. a • For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43). Hook the connecting fork of the side cutter b onto the needle clamp screw. a b a a Notch in presser foot holder b Pin X The side cutter is attached. b a Connecting fork b Needle clamp screw 76