Brother International SE-400 Users Manual - English - Page 132
Attaching the Embroidery Frame - needle break during embroidery
View all Brother International SE-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
EMBROIDERY Attaching the Embroidery Frame This section describes how to attach the embroidery frame. Attaching the embroidery frame Wind the embroidery bobbin thread onto the a bobbin and set it into the bobbin case. • For details, refer to "Winding/Installing the Bobbin" (page 22). Firmly insert the embroidery frame guide into e the embroidery carriage frame holder from the top. Line up the embroidery frame guide tabs and the embroidery carriage frame holder slots and push in until it clicks and stops. a Raise the presser foot lever. b a a Presser foot lever Press (Needle position button) once or c twice to raise the needle. a a Needle position button Pass the embroidery frame under the presser d foot while raising the presser foot lever even further. b a Embroidery frame guide tabs b Embroidery carriage frame holder slots X The embroidery unit is attached. Note z Be sure to insert both pins. If only the forward or the back pin is inserted, the pattern may not turn out correctly. CAUTION ● Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury. CAUTION ● Do not touch a button. If a button is accidentally pressed, the machine starts sewing, and your finger may be pricked with the needle or the needle may break. 130