Brother International SE-400 Users Manual - English - Page 32
out the end of the bobbin thread.
View all Brother International SE-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
GETTING READY Carefully pull the upper thread upward to pull e out the end of the bobbin thread. Pull out about 10-15 cm (4-5 inches) of the f bobbin thread under the presser foot toward the rear of the machine. Reattach the bobbin cover. g Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side. a b 2 1 a Tab b Lower-left corner 30
30
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e
Carefully pull the upper thread upward to pull
out the end of the bobbin thread.
f
Pull out about 10-15 cm (4-5 inches) of the
bobbin thread under the presser foot toward
the rear of the machine.
g
Reattach the bobbin cover.
Insert the tab in the lower-left corner of the
bobbin cover, and then lightly press down on
the right side.
a
Tab
b
Lower-left corner
1
2
a
b