Canon EOS 10D SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5
Canon EOS 10D - Digital Camera SLR Manual
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon EOS 10D manual content summary:
- Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 1
Software INSTRUCTIONS Windows Macintosh EOS DIGITAL SOLUTION DISK Ver. 5 Please read these instructions carefully before using the EOS 10D software. This guide should be kept in a safe place so that it can be used for future reference. ´ English Edition - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 2
or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service or correction of errors or - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 3
you must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights. 6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 4
instructions and the explanations for TWAIN Driver-compatible applications all use examples from Adobe Photoshop Elements 2.0. : Marks information that should be read before use to prevent damage to the camera, camera malfunction, or problems that would interfere with the functioning of software - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 5
, you can use the WIA Driver or TWAIN Driver (➞W-57) to quickly and easily download images from your camera. You can also use ZoomBrowser EX (➞W-63) or ImageBrowser (➞M-55) to produce ExifPrint-compatible prints and merge panoramic images. ● Descriptions of the software applications are provided in - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 6
been made to ensure that the information contained in these instructions is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. • No part - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 7
display, save and erase images. ● Allows you to perform image processing including processing RAW images. RemoteCapture Windows Macintosh ● RemoteCapture allows you to operate the camera remotely and download images to your computer. RemoteCapture also lets you take images using a timer shooting or - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 8
° cylinder-shaped panorama image. WIA Driver Windows ● This is a driver for Windows XP and Windows Me that allows you to connect the camera to your computer using the interface cable and that automatically starts the [Scanner and Camera Wizard] so you can download JPEG images to your computer. ● It - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 9
Software User Guide PDF format manuals providing more detailed explanations of the functions available in ZoomBrowser EX and ImageBrowser are available on the Canon website. For URL addresses*, please see the Canon Customer Support contacts in the Canon Limited Warranty supplied with your camera - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 10
256 MB required RAM Windows 2000 Windows Me Minimum 128 MB required Windows 98 SE Interface USB Hard disk space File Viewer Utility RemoteCapture WIA Driver TWAIN Driver ZoomBrowser EX (Including the PhotoRecord printing program) PhotoStitch Adobe Photoshop Elements 2.0 100 MB or more 20 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 11
a standard feature (users of first-generation iMacs require a firmware update. ➞M-70) Power PC Mac OS 9.0 to 9.2 Minimum 128 MB required Mac OS X Minimum 256 MB required USB File Viewer Utility RemoteCapture ImageBrowser PhotoStitch Adobe Photoshop Elements 2.0 100 MB or more 15 MB or more 50 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 12
MEMO A-11 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 13
Windows XP. 1 Installing the Software on Your Computer W-3 Installing the Software W-4 Installing the Software from the EOS DIGITAL SOLUTION DISK W-4 Installing Photoshop Elements 2.0 ....... W-8 Please Register Your Camera Control Panel W-19 Selecting the Model-Specific Processing Mode W-20 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 14
Elements 2.0 W-90 Adobe Customer Support W-91 Index W-92 5 Downloading Images with the WIA Driver/TWAIN Driver ..... W-57 Downloading Images with the WIA Driver W-58 Downloading with the Scanner and Camera Wizard W-58 Downloading with Windows Explorer . W-59 Downloading with the WIA TWAIN - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 15
1W 1 Installing the Software on Your Computer This chapter describes how to install the bundled software. - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 16
Windows 2000/Windows 98 SE: TWAIN Driver ● Before you connect the camera to your computer, you must install the WIA Driver or TWAIN Driver from the EOS DIGITAL SOLUTION DISK on your computer. After installation is complete, take the EOS DIGITAL SOLUTION DISK out of the CDROM drive. ● Set the camera - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 17
. If you agree to the terms of the license, click the [Yes] button. 6 Select the folder in which the software will be installed and then click the [Next] button. 7 Select the software to be installed. ● Click the checkboxes for the software to be installed and then click the [Next] button. W-5 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 18
to the User's Manual for your computer for details. USB port Interface cable 12 Plug the interface cable into your camera. ● Open the cover and plug the interface cable connector into the < > terminal with the < > (USB) icon facing the front of the camera. DIGITAL terminal Interface cable - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 19
EOS 10D Instructions.) (4) Is there sufficient charge left in the camera battery? ● When you connect your camera to a computer, you should use the DC Coupler Kit (optional) so that you can continue to use your camera regardless of battery level. If you have checked that none of the above problems - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 20
camera, in order to receive further product information. To proceed to the online User Registration page, simply click the [User Registration] button from the [EOS DIGITAL SOLUTION DISK]. If there is no response when you click the [User Registration] button, please double-click on the [/SOFTWARE - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 21
2W 2 Getting Ready to Work with Images This chapter explains how to connect the camera to your computer and how to use a card reader (third-party product). - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 22
operations while the software installed from the SOLUTION DISK is running after connecting the camera to the computer as a communications error may occur. • Set the camera's main switch to . • Open the CF card slot cover. • Disconnect the interface cable or remove the battery. • Disconnect the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 23
can continue to use your camera regardless of battery level. You should set the camera's Auto power off function to [Off]. About Backing up (Copying) Images ● You should back up (copy) the captured images on the hard disk of your computer, etc. before working with EOS DIGITAL SOLUTION DISK. W-11 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 24
"xxx" represents a number between 100 and 999, within the [DCIM] folder. IMG_xxxx.JPG (JPEG images) CRW_xxxx.CRW (RAW images) CRW_xxxx.THM* The folder that holds the image control files in the DCIM folder. The folder created when DPOF settings are set. It holds the DPOF settings files. ● The "xxxx - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 25
Viewer Utility to display and save images stored on a CF card loaded in the camera, and also explains how to perform image processing including processing RAW images and how to transfer images to the retouching software. ● For more information on using File Viewer Utility, refer also to the sources - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 26
] dialog box appears. ● Click the [Cancel] button to exit the [Scanners and Cameras Wizard]. 2 Click the [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [FileViewerUtility xx] s [FileViewerUtility]. ● You can also start File Viewer Utility by - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 27
window Show/Hide Thumbnail Frames button (➞W-23) Menu bar Displays the [File], [Edit], [View], and [Help] menus. Model-specific processing mode list box (➞W-20) Path display Displays the connected camera values (8-bit conversion) are shown here. Image display area * The above window shows all - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 28
Erase Image button (➞W-25) Camera Settings button (➞W-44) IPTC information button * Images shot on an EOS 10D do not support this function. Refresh button button * Images shot on an EOS 10D do not support this function. Protect button (➞W-24) * The above window shows all the information at once - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 29
Starting File Viewer Utility Digital Exposure Compensation button (➞W-28) White Balance list box (➞W-29, W-30) Contrast list box (➞W-32) (➞W-33) Working with Images in File Viewer Utility * The above window shows all the information at once. In actual use, only the information needed is displayed. W- - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 30
] folder in [Tree View Area]. ● "10D" (the camera model) is displayed in place of the "XXX" in [EOS XXX]. ● A number between 100 and 999 is displayed in place of the in File Viewer Utility. • JPEG images • RAW images shot on a Canon digital camera • TIFF images saved in File Viewer Utility (➞W- - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 31
Selecting Images Selecting Images with the Mouse Position the mouse cursor over the image and click on it. ● To select multiple images at random, hold down the key and click the images. ● To select consecutive images, click W the first image and then hold down the key and - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 32
can process the RAW images shot on the selected camera. Select a model-specific processing mode from the [Modelspecific processing mode] list box. [Common Processing] The RAW image process tool bar is hidden and the settings for RAW image processing cannot be changed. [EOS 10D] The RAW image process - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 33
for protected images. Digital exposure 3 compensation value (➞W-28) Recording format The [RAW] symbol is displayed for RAW images. No symbol "Simultaneous Capture in RAW and JPEG Formats" in the EOS 10D Instructions for information about the settings for JPEG images recorded simultaneously with - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 34
display size. In the Preview mode, the available image sizes are [Large] (100% - pixel-equivalent), [Middle] (50%) and [Small] (25%). Checking the 21) 2 Click the [Display AF Point] button. \ The AF point of the camera used when the shot was taken is displayed. ● Click the button again to hide the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 35
● Click the button again to display the information display frame of the thumbnail image. 3 Updating Information on Main Window If you take shots while the File Viewer Utility main window is displayed, the displayed image and information may not be up-to-date. In such a case, update the displayed - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 36
When multiple images are selected, all the selected images are protected. ● The [ ] is automatically displayed for images that were protected on the camera. ● Protection only prevents images from being erased. Other types of image processing can still be performed for protected images. ● A range of - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 37
Images Use the procedure below to erase unwanted images from a CF card or your computer. 1 Click the [Erase Image] button. \ The [Canon Digital Camera] dialog box appears. 2 Click the [OK] button. \ The image is erased. ● Erased images cannot be restored. Check carefully before erasing images - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 38
the file name, camera model name and shooting data. The number of items displayed differs depending on the camera settings. ● When you shot in Adobe RGB color must be transferred to the retouching software (➞W40) so that settings such as the saturation can be adjusted. The Adobe RGB information - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 39
to RAW images temporarily downloaded to the computer. Accordingly, you can redo the processing repeatedly with different parameters. You can also change the modified parameters back to the settings used when the shot was taken. W 1 Process the RAW image. ● Select [EOS 10D] from the [Model - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 40
+/-2 stops in 0.1-stop increments. 1 Click the [Digital Exposure Compensation] button. \ The [Digital Exposure Compensation] dialog box appears. 2 Compensate the image applied to the image and the [Digital Exposure Compensation] dialog box closes. \ The corrected value is displayed with the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 41
can adjust the white balance in your RAW images. You can adjust the white balance by selecting a setting in the [White Balance] list box light bulb) light. For fluorescent light. When flash is used. You can manually set color temperature for 2800 to 10000K (in 100K increments). (➞W-30) Color temp./K - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 42
Processing RAW Images Setting the Color Temperature You can set the color temperature to a value between 2800K and 10000K (in 100K increments). 1 Select [color temp] from the [White Balance] list box. 2 Enter a color temperature. ● Enter - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 43
Processing RAW Images Click White Balance Function This function allows you to automatically adjust the white balance simply by clicking a point in a white part of the image. 1 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 44
Processing RAW Images Adjusting the Color in Images Use the procedures below to adjust the color parameters (contrast, color saturation and color tone) in images. You can adjust the color by selecting settings from the respective list boxes. Adjusting the Contrast Select the desired setting from the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 45
process allows you to quickly and easily apply the processing parameters used for one RAW image (such as the digital exposure compensation and white balance adjustment settings) to other images. 1 Right-click a RAW image that has been processed and select [Copy processing parameters] from the menu - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 46
how to extract JPEG images from RAW images using a simple procedure and file on your computer. Saving Images from the Camera to Your Computer You should save the images you \ The [Save File] dialog box appears. 3 Specify the desired settings and click the [OK] button. \ The images are saved in - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 47
quality) when you select [Exif-JPEG] from the [Convert from RAW to Other Format] list box. You can select from 4 compression digits for the file number. 10 Specifies the first file number. 11 Images shot on an EOS 10D do not support this function. 12 Images shot on an EOS 10D do not support - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 48
included with an EOS 10D RAW image to your computer by extracting the JPEG image from the RAW image. See "Simultaneous Capture in RAW and JPEG Formats" in the EOS 10D Instructions for information the settings for JPEG images recorded simultaneously with RAW images. 1 Select the RAW image from which - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 49
select this option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or on a image will be saved. 5 Click this checkbox when you want to save the RAW image without changing the name. W 6 This is text inserted before the file - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 50
Click the [Save File] button and select [Save Index] from the menu that appears. \ The [Index Sheet Options] dialog box appears. 3 Enter the settings and click the [OK] button. \ The [Save index file] dialog box appears. Index Sheet Options dialog box 1 2 3 4 5 6 1 Enter the width of the index - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 51
Saving Images 4 Specify the desired settings and click the [OK] button. \ select this option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or on a up to 9 digits for the file number. 7 Specifies the first file number. W-39 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 52
[PhotoshopElements.exe] and then click the [Open] button. \ Photoshop Elements 2.0 is specified as the retouching software to which images will be transferred and then the [General Settings] tab sheet appears. 4 Click the [Browse] button of [Image transfer folder]. \ The dialog box for selecting - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 53
as an example, you can also transfer images by following the same procedure even if you specify any other retouching software in "Specifying the Image Transfer Settings" (➞W-40). W 1 Select images to be transferred. (➞W-19) 2 Select the transfer mode from the [Image transfer mode] list box. ● There - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 54
] button. \ The [Preferences] dialog box appears. 2 Select the [General Settings] tab or the [RAW Image Processing settings] tab. \ The selected tab sheet appears. 3 Specify the desired settings and click the [OK] button. \ The settings are applied and the [Preferences] dialog box closes to end the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 55
Viewer Utility ● You can specify the settings shown below in the [RAW Image Processing settings] tab sheet. The settings described here are those shown when [EOS 10D] is selected in the [Model Name] list box. 4 Select [EOS 10D]. * When images shot on a Canon camera are saved in the selected folder - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 56
the status of the battery and the CF card. Display the [Camera Settings] dialog box. ● To display this dialog box from File Viewer Utility, click the [Camera Settings] button in the main window. ● To display this dialog box from RemoteCapture, select [Camera Settings] from the [Camera] menu in the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 57
Specifying the Camera Settings Camera Settings dialog box This box shows the Camera's model name, Body ID and Firmware Version. W These fields set the camera owner and the date and time. You can enter up to 31 characters in [Owner's Name]. Working with Images in File Viewer Utility This box - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 58
Date and Time data from your computer. 3 Click the [Apply] button. \ The owner's name, date and time settings are applied to the camera. ● Once you click the [Apply] button, the settings remain effective until you reset the owner's name, date or time. ● Clicking the [OK] button applies the specified - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 59
4W Operating the Camera from 4 Your Computer This chapter describes the operations using the RemoteCapture software, such as remote [Start] button and select [All Programs] ([Programs] in other versions of Windows) s [Canon Utilities] s [RemoteCapture xx] ("xx" is the version) s [RemoteCapture - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 60
the shutter button on the camera, the image is saved on your Size/Quality list box computer. Allows you to select the recorded quality of images. Detail setting button Displays the Detailed Settings window below the Shooting window allowing you to make various settings. Click the button again - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 61
Starting RemoteCapture Save window Thumbnail view Displays thumbnail images of the shots taken. The [RAW] symbol is displayed for RAW images. No symbol the connection to the camera. W View button Displays the image selected in thumbnail view enlarged in a separate window. Histogram Shows the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 62
for shooting (the lens is not attached, etc.), you cannot perform the operation as shown below. Taking Shots from Your Computer 1 Set the camera up ready to shoot. 2 Make various settings. ● For information on how to set the size and image quality, refer to "Shooting window" (➞W-48). ● See "Default - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 63
downloaded image, select the image and then select [Rotate Saved Image 90 degree Right] or [Rotate Saved Image 90 degree Left] in the [Edit] menu. ● By selecting [Camera Settings] from the [Camera] menu in the Shooting window, you can specify the camera settings. See "Specifying the Camera Settings - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 64
the specified number of seconds. Checking Shooting Settings You can confirm the camera settings used when images are taken. Click [ ] (the Detail setting button) in the Shooting window and select the [Shooting Settings] tab. \ The camera settings used when images are taken are displayed. Printing - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 65
to specify the file names. W 1 Select [Preferences] in the [File] menu in the Save window. \ The [Preferences] dialog box appears. 2 Specify the desired settings and click the [OK] button. \ The settings are saved and the [Preferences] dialog box closes to end the procedure. Preferences dialog - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 66
captured images both on your computer and on the CF card in the camera. 3 Use this field to enter a file name when saving a captured image. * The file name can consist of up to 16 characters. 4 Sets the number of digits in the sequence number that follows the file name and the starting number - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 67
lens is not attached, etc.), you cannot make some of the settings. W ● The shooting settings cannot be specified if the camera's shooting mode is set to the Basic zone. Set the camera's shooting mode to the Creative zone. 1 Display the Detailed Settings window. ● Click [ ] (the Detail setting - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 68
you to specify ISO Speed. 5 Allows you to specify Color Temperature. 6 Allows you to specify the Av (aperture value) and Tv (shutter speed) settings. (The specifiable settings are only displayed when Shutter-priority AE, Aperture-priority AE or Manual Exposure is selected as the shooting mode on the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 69
Readme: Click the [Start] button and then select [All Programs] ([Programs] on Windows Me) s [Canon Utilities] s [EOS 10D WIA Driver] s [WIA Driver Readme]. ● For more information on using the TWAIN Driver, refer also to the sources listed below. Readme: Click the [Start] button and select [Programs - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 70
process RAW images, use the File Viewer Utility described in Chapter 3. Downloading with the Scanner and Camera Wizard Follow the Wizard's on-screen messages to download JPEG images to the computer. 1 Connect the camera to your computer. (➞W-10) \ If you are using Windows XP, the [EOS 10D] dialog - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 71
appears. ● "10D" (the camera model) is displayed in place of the "XXX" in [EOS XXX]. ● A number between 100 and 999 is displayed in place of the "xxx" in [xxxCANON]. \ The camera's images will be displayed as thumbnails in the Explorer window. 4 Save the images on your computer. ● Download by - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 72
images via the WIA TWAIN Driver and import them into your program. The description given here use Photoshop Elements 2.0, as an example. 1 Connect the camera to your computer. (➞W-10) \ If you are using Windows XP, the [EOS 10D] dialog box appears. \ If you are using Windows Me, the [Scanner and - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 73
xxxCANON] folder. ● A number between 100 and 999 is displayed in xxx. 6 Select the image(s) you wish to download and click the [Get Pictures] button. W \ The selected image(s) will be downloaded to the software. 5 Downloading Images with the WIA Driver/TWAIN Driver RAW images are displayed by - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 74
Elements 2.0]. \ Photoshop Elements 2.0 starts up. 3 Select the [File] menu s [Import] s [Canon EOS 10D USB]. \ The TWAIN Driver starts and the JPEG image saved on the CF card in the camera is displayed. ● To exit the TWAIN Driver, select [Exit] from the [File] menu. 4 Select the image to be - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 75
downloading the camera's images, printing them, and sending e-mail with downloaded Windows) s [Canon Utilities] s [ZoomBrowser EX] s [ZoomBrowser EX README]. Help: Displayed by clicking the [Help] button in the ZoomBrowser EX main window. Software User Guide: View by downloading from the Canon - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 76
reader are displayed in the Camera window. Camera Window Automatically attaches images to an e-mail. Displays images as a slideshow. Prints images. Downloads images to the computer. The [RAW] symbol is displayed for RAW images Camera reconnection, the camera settings (➞W-44) and the slideshow/edit - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 77
camera to your computer (e.g. if you started File Viewer Utility when you connected the camera to your computer) and you want to download ] in other versions of Windows) s [Canon Utilities] s [ZoomBrowser EX] s [ party retouching software. Prints images. Opens the Camera window. When - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 78
next folder level up from the folders currently displayed in the Browser window. 2 Click the [Camera & Memory Card] button and select [Display/ Download images] from the menu that appears. \ The ZoomBrowser EX main window closes and the Camera window opens. ● The images saved on the CF card in the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 79
images to be downloaded from the Camera window and click the [Download image] button. ● Click the displayed images to select them. You can also select multiple images by clicking images successively. ● Click a selected image again to deselect the image. W \ The [Download Settings] dialog box - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 80
settings and click the [OK] button. \ The images are saved on your computer, the Camera window closes and the ZoomBrowser EX main window opens. \ The downloaded images are displayed in the ZoomBrowser EX main window .JPG] format. If you deselect the checkbox, the file name is [100-0001.jpg]. W-68 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 81
in which you can select the information to be printed with the images. \ The [Download Settings] dialog box (➞W-68) appears in the Camera window. Specify the desired settings and click the [OK] button. A window then appears in which you can select the information to be printed with the images - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 82
Canon perforated paper. (This option is not displayed if you are using a printer that does not support printing on perforated paper.) * The print mode settings window appears. Automatically adjusts the image layout. Arranges the images as an index. Allows all the images to be arranged manually. - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 83
Menu button Displays the menu options used to edit the window. Select [AUTO], [INDEX] or [MANUAL] as the layout method. You can enter a title by and allows you to change settings such as the decorative design and the colors used. Opens the [Fetch Photos] dialog box and downloads new images on the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 84
of images displayed on each page using the [Number of Photos per page when fetching] setting in the [Preferences] dialog box that appears when you If this problem occurs, open the Control Panel and select [Printers and other hardware] s [Printers and Faxes] (In other versions of Windows select - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 85
Exif Print] checkbox in the [Photo Control Panel] dialog box and then click the [CLOSE] button. \ The selected image is corrected. 6 Working with Images in ZoomBrowser EX Images shot on camera that comply with Exif 2.2 incorporate recorded information on the settings used when the shot was taken - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 86
mail messages and then send the mail. To automatically start your e-mail software from ZoomBrowser EX and send images, your e-mail software must be set as a MAPI client. Refer to the user manuals for your e-mail software for information on MAPI settings. 1 Display an image in the ZoomBrowser EX main - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 87
are saved in the specified destination folder. 6 Automatic e-mail software starting is only supported for e-mail software that supports MAPI. If your e-mail software does not support MAPI, save the image and start the email software before attaching the image to the outgoing e-mail. W-75 Working - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 88
[View & Modify] button and select [Stitch Photos] from the menu that appears. \ PhotoStitch starts up. ● Follow the instructions in the guidance window to merge the images. ● Please refer to the PhotoStitch Help menu for more details. ● You cannot open RAW images in PhotoStitch. ● Up to four images - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 89
7W Troubleshooting and Uninstallation This chapter provides a troubleshooting manual and describes the software uninstallation procedures. 7 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 90
. (➞ "Installing and Removing the Battery" in the EOS 10D Instructions.) ● Do you have more than one camera connected to your computer? If you connect more than one camera to the same computer, the driver and camera may not operate normally. ➞ Close the software and disconnect all the interface - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 91
with the interface cable and set the camera's main switch to (➞W-10) and open the [Device Manager] (➞W-80). Click the plus symbol [+] to the left of [Imaging devices] and check that [EOS 10D] is displayed. Troubleshooting W ➞ If [EOS 10D] does not appear, the driver is not operating normally - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 92
procedure to re-install the driver. 1 Delete [EOS 10D] or [Canon Digital Camera] displayed in [Other devices] or [Unknown devices]. 2 Disconnect the interface cable and uninstall the driver. (➞W-82) 3 Re-install the driver. (➞W-4) To Display the Device Manager ● Windows XP ➞ Click the [Start] button - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 93
versions of Windows) s [Canon Utilities] s [FileViewerUtility xx] s [FileViewerUtility Uninstall]. ● File Viewer Utility version information is displayed in xx. 2 Proceed with the uninstallation as directed by the on-screen messages. \ Software is uninstalled. 7 Troubleshooting and Uninstallation - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 94
, you must first uninstall the WIA Driver or TWAIN Driver, then remove [EOS 10D] from the [Scanners and Cameras Properties] dialog box or the [Scanners and Cameras] dialog box, and then delete the driver settings files. ● Windows XP Professional or Windows 2000 users should log in using computer - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 95
and Cameras] dialog box, close the dialog box and proceed as follows. ● If drivers for other devices such as scanners are already installed, those device names are displayed. 7 Display [Device Manager]. (➞W-80) 8 Delete [EOS 10D]. For Windows XP and Windows 2000 users: 7 Troubleshooting and - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 96
all the occurrences. ● When [EOS 10D] is not displayed in [Imaging devices] or [Other devices], close the dialog box and proceed as follows. 9 Delete the driver settings files. ● The method for deleting the settings files differs depending on your operating system software. Refer to the information - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 97
Driver Settings Files Mistakenly deleting the wrong files can cause Windows to malfunction. Check the file names carefully before deleting any files. For Windows ] checkbox. ● If these settings are already selected, simply proceed to the next step. Troubleshooting and Uninstallation 7 4 Click the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 98
[Oem*.inf] file to display the file contents. Check that [; **** Canon Camera Driver Setup File ****] appears on the first line. ● If there are multiple file names very carefully before proceeding. For Windows 2000 users: 1 Click the [Start] button and select [Settings] s [Control Panel]. 2 Double- - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 99
checkbox. ● If these settings are already selected, simply proceed file contents. Check that [; **** Canon Camera Driver Setup File ****] appears on the Troubleshooting and Uninstallation The [Inf] folder contains a large number of files. Deleting the wrong files could, at worst, prevent Windows - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 100
in [Hidden files] and then deselect the [Hide file extensions for known file types] checkbox. ● If these settings are already selected, simply proceed to the next step. Windows Me Windows 98 SE 4 Click the [OK] button to close the [Folder Options] dialog box. \ Previously hidden folders and - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 101
exists. ● The [Canon.IncCAP_10D.inf] file may not exist depending on your computer system. ● "10D" is displayed in place of the "XXX". 7 Troubleshooting and Uninstallation The [INF] folder contains a large number of files. Deleting the wrong files could, at worst, prevent Windows from starting - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 102
privileges. 1 Click the [Start] button and then click [Control Panel] s [Add or Remove Programs]. ● In other versions of Windows, click the [Start] button and then click [Settings] s [Control Panel]. Then double-click the [Add or Remove Programs] icon in the Control Panel. \ The [Add or Remove - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 103
and Opening Instructions Place the Adobe Photoshop Elements 2.0 CD-ROM in the drive and double-click [My Computer] on the desktop, followed by the [Photosle] CD-ROM icon. The window will show folders with language names. Double-click the appropriate language folder and the [Support.pdf] file - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 104
Camera to Your Computer W-10 Copying the Processing Parameters .... W-33 D Digital Exposure Compensation W-28 Display Mode JPEG Preview W-21 Preview W-21 Thumbnail Display W-21 Displaying Images W-18 Downloading and Saving Images ......... W-67 Downloading Images with the Retouching Software - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 105
EX W-64 System Requirements A-9 T Timer Shooting W-52 Transferring Images to Retouching Software W-40 Transferring Images to the TWAIN Driver-compatible Software W-62 U Uninstalling Photoshop Elements 2.0 W-90 Software W-81 WIA Driver/TWAIN Driver W-82 Index W 7 Troubleshooting and - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 106
MEMO - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 107
Software on Your Computer M-3 Installing the Software M-4 Installing the Software from the EOS DIGITAL SOLUTION DISK M-4 Installing Photoshop Elements 2.0 ....... M-6 Please Register Your Camera from the Control Panel M-17 Selecting the Model-Specific Processing Mode M-18 Selecting the Image - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 108
Images M-50 Setting RemoteCapture M-51 Default Settings M-51 Detailed Settings M-53 6 Troubleshooting and Uninstallation M-69 Troubleshooting M-70 Uninstallation Procedure M-72 Uninstalling the Software M-72 Uninstalling Photoshop Elements 2.0 M-72 Adobe Customer Support M-73 Index - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 109
1M 1 Installing the Software on Your Computer This chapter describes how to install the bundled software. - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 110
icon s the [Mac OS 9] folder s the [Canon EOS Digital Installer] icon to start. ● If you are using OS X, double-click the SOLUTION DISK icon s the [Mac OS X] folder s the [Canon EOS Digital Installer] icon to start. \ The installer panel appears. 4 Click [Digital Camera Software Installation]. M-4 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 111
User License Agreement carefully. If you agree to the terms of the license, click the [Agree] button. M 7 Select the folder in which the software will be installed and then click the [Choose] button. 1 8 Proceed with the installation as directed by the on-screen messages. \ When installation - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 112
Installing the Software Installing Photoshop Elements 2.0 ● You are Camera! We recommend you take a moment to register your camera, in order to receive further product information. To proceed to the online User Registration page, simply click the [User Registration] button from the [EOS DIGITAL - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 113
2M 2 Getting Ready to Work with Images This chapter explains how to connect the camera to your computer and how to use a card reader (third-party product). - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 114
operations while the software installed from the SOLUTION DISK is running after connecting the camera to the computer as a communications error may occur. • Set the camera's main switch to . • Open the CF card slot cover. • Disconnect the interface cable or remove the battery. • Disconnect the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 115
can continue to use your camera regardless of battery level. You should set the camera's Auto power off function to [Off]. About Backing up (Copying) Images ● You should back up (copy) the captured images on the hard disk of your computer, etc. before working with EOS DIGITAL SOLUTION DISK. M-9 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 116
"xxx" represents a number between 100 and 999, within the [DCIM] folder. IMG_xxxx.JPG (JPEG images) CRW_xxxx.CRW (RAW images) CRW_xxxx.THM* The folder that holds the image control files in the DCIM folder. The folder created when DPOF settings are set. It holds the DPOF settings files. ● The "xxxx - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 117
Viewer Utility to display and save images stored on a CF card loaded in the camera, and also explains how to perform image processing including processing RAW images and how to transfer images to the retouching software. ● For more information on using File Viewer Utility, refer also to the sources - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 118
Starting File Viewer Utility 1 Connect the camera to your computer. (➞M-8) ● In OS 9, ImageBrowser starts up and the [Auto Run] dialog box appears. Click the [Cancel] button and select [Quit] from the [File] menu to exit ImageBrowser. 2 Double-click the [Canon File Viewer Utility] icon on the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 119
window Show/Hide Thumbnail Frames button (➞M-21) Display Mode list box (➞M-19) Display Size list box (➞M-20) Path display Displays the connected camera, drive on your computer and folder. Model and its RGB values (8-bit conversion) are shown here. * The above window shows all the information at - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 120
IPTC information button * Images shot on an EOS 10D do not support this function. Camera Settings button (➞M-42) Rotate right 90 degrees button sound button * Images shot on an EOS 10D do not support this function. protect button (➞M-22) * The above window shows all the information at once. In - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 121
) Contrast list box (➞M-30) Color Temp. input box (➞M-28) Click White Balance button (➞M-29) Color saturation list box (➞M-30) M Color tone list box (➞M-30) 3 Sharpness list box (➞M-31) Colorspace list box (➞M-31) * The above window shows all the information at once. In actual use, only the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 122
folder in [Show the folder tree]. ● "10D" (the camera model) is displayed in place of the "XXX" in [EOS XXX]. ● A number between 100 and 999 is displayed in place of the in File Viewer Utility. • JPEG images • RAW images shot on a Canon digital camera • TIFF images saved in File Viewer Utility (➞M- - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 123
Selecting Images Selecting Images with the Mouse Position the mouse cursor over the image and click on it. ● To select multiple images at random, hold down the key and click the images. ● To select consecutive images, click the first image and then hold down the + keys - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 124
can process the RAW images shot on the selected camera. Select a model-specific processing mode from the [Modelspecific processing mode] list box. [Common Processing] The RAW image process tool bar is hidden and the settings for RAW image processing cannot be changed. [EOS 10D] The RAW image process - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 125
in the Thumbnail display mode. ● If you double-click on the thumbnail-displayed image, it is displayed in the Preview mode. ● See "Simultaneous Capture in RAW and JPEG Formats" in the EOS 10D Instructions for information about the settings for JPEG images recorded simultaneously with - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 126
display size. In the Preview mode, the available image sizes are [Large] (100% - pixel-equivalent), [Middle] (50%) and [Small] (25%). Checking the 19) 2 Click the [Display AF point] button. \ The AF point of the camera used when the shot was taken is displayed. ● Click the button again to hide the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 127
. ● Click the button again to display the information display frame of the thumbnail image. 3 Updating Information on Main Window If you take shots while the File Viewer Utility main window is displayed, the displayed image and information may not be up-to-date. In such a case, update the displayed - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 128
When multiple images are selected, all the selected images are protected. ● The [ ] is automatically displayed for images that were protected on the camera. ● Protection only prevents images from being erased. Other types of image processing can still be performed for protected images. ● A range of - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 129
Working with Selected Images Rotating Images Use the procedure below to rotate a selected image by 90-degree increments left or right. Rotate the image. ● To rotate the image right (clockwise), click the [Rotate right 90 degrees] button. ● To rotate the image left (counterclockwise), click the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 130
the file name, camera model name and shooting data. The number of items displayed differs depending on the camera settings. ● When you shot in Adobe RGB color must be transferred to the retouching software (➞M38) so that settings such as the saturation can be adjusted. The Adobe RGB information - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 131
to RAW images temporarily downloaded to the computer. Accordingly, you can redo the processing repeatedly with different parameters. You can also change the modified parameters back to the settings used when the shot was taken. 1 Process the RAW image. ● Select [EOS 10D] from the [Model-specific - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 132
) You can correct the brightness of an image in the range of +/-2 stops in 0.1-stop increments. 1 Click the [Digital Exposure Compensation] button. \ The [Digital Exposure Compensation] dialog box appears. 2 Compensate the image brightness. ● Drag the slider left or right with the mouse to - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 133
adjust the white balance in your RAW images. You can adjust the white balance by selecting a setting in the [White Balance] list box fluorescent light. When flash is used. You can manually set color temperature for 2800 to 10000K (in 100K increments). (➞M-28) Color temp./K (Kelvin) - Approx. 3000 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 134
Processing RAW Images Setting the Color Temperature You can set the color temperature to a value between 2800K and 10000K (in 100K increments). 1 Select [color temp] from the [White Balance] and 10000K (in 100K increments). 3 Press the key. \ The specified value is applied to the image. M-28 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 135
Working with Images in File Viewer Utility Processing RAW Images Click White Balance Function This function allows you to automatically adjust the white balance simply by clicking a point in a white part of the image. 1 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 136
Processing RAW Images Adjusting the Color in Images Use the procedures below to adjust the color parameters (contrast, color saturation and color tone) in images. You can adjust the color by selecting settings from the respective list boxes. Adjusting the Contrast Select the desired setting from the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 137
you to quickly and easily apply the processing parameters used for one RAW image (such as the digital exposure compensation and white balance adjustment settings) to other images. 1 Hold down the key and click a RAW image that has been processed and select [Copy Current Conditions] from - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 138
how to extract JPEG images from RAW images using a simple procedure and file on your computer. Saving Images from the Camera to Your Computer You should save the images you The [Save File] dialog box appears. 3 Specify the desired settings and click the [OK] button. \ The images are saved in the selected - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 139
option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or digits for the file number. 10 Specifies the first file number. 11 Images shot on an EOS 10D do not support this function. 12 Images shot on an EOS 10D do not support - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 140
included with an EOS 10D RAW image to your computer by extracting the JPEG image from the RAW image. See "Simultaneous Capture in RAW and JPEG Formats" in the EOS 10D Instructions for information the settings for JPEG images recorded simultaneously with RAW images. 1 Select the RAW image from which - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 141
select this option for images that are saved on a CF card in the camera. This option is only available for images saved on your computer or on a image will be saved. 5 Click this checkbox when you want to save the RAW image without changing the name. 6 This is text inserted before the file number - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 142
Click the [Save File] button and select [Save Index] from the menu that appears. \ The [Index sheet options] dialog box appears. 3 Enter the settings and click the [OK] button. \ The [Save File] dialog box appears. Index sheet options dialog box 1 2 3 4 5 6 1 Enter the width of the index sheet - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 143
settings and click the [OK] button. \ The images are saved as an index in the selected folder. Save File dialog box 1 2 4 3 M 5 7 6 1 The converted image is saved in the same folder as the displayed image. You cannot 3 select this option for images that are saved on a CF card in the camera - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 144
[Photoshop Elements 2.0] and then click the [Open] button. \ Photoshop Elements 2.0 is specified as the retouching software to which images will be transferred and then the [General Settings] tab sheet appears. 4 Click the [Browse] button of [Image transfer folder]. \ The [Select transfer folder - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 145
an example, you can also transfer images by following the same procedure even if you specify any other retouching software in "Specifying the Image Transfer Settings" (➞M-38). 1 Select images to be transferred. (➞M-17) M 2 Select the transfer mode from the [Image transfer mode] list box. ● There - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 146
] button. \ The [Preferences] dialog box appears. 2 Select the [General Settings] tab or the [RAW Image Processing settings] tab. \ The selected tab sheet appears. 3 Specify the desired settings and click the [OK] button. \ The settings are applied and the [Preferences] dialog box closes to end the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 147
Utility ● You can specify the settings shown below in the [RAW Image Processing settings] tab sheet. 3 The settings described here are those shown when [EOS 10D] is selected in the [Model Name] list box. 4 Select [EOS 10D]. * When images shot on a Canon camera are saved in the selected folder - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 148
select [Camera Setting] from the [File] menu. ● To display this dialog box from ImageBrowser, select the [Camera Settings] in the menu that appears by clicking the [SETUP OPTIONS] button in the Camera window, or select the [Canon Camera] menu s [Settings] s [Camera Settings]. \ The [Camera Settings - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 149
Camera Settings dialog box Basic Settings tab sheet Specifying the Camera Settings This box shows the Camera's model name, Body ID and Firmware Version. These fields set the camera owner and the date and time. You can enter up to 31 characters in [Owner's Name]. M This box shows whether a CF - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 150
the [Synchronize with Mac] checkbox in OS X). 3 Click the [Apply] button. \ The owner's name, date and time settings are applied to the camera. ● Once you click the [Apply] button, the settings remain effective until you reset the owner's name, date or time. ● Clicking the [OK] button applies the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 151
the Camera from Your Computer 4 This chapter describes the operations using the RemoteCapture software, such as remote shooting, timer shooting and interval timer shooting. ● For more information on using RemoteCapture, refer also to the sources listed below. ReadMe: Double-click the [Canon - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 152
the [Connect] button. ● When the [Communication Settings] dialog box appears, select [USB Port] from the [Port] list box, select [EOS 10D] from the [Detected Camera] list box and then click the [Set] button. \ The Shooting window and Save window appear. Shooting window Shots to Go Displays the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 153
view Displays thumbnail images of the shots taken. Save window The [RAW] symbol is displayed for RAW images. No symbol is shown for JPEG images. Cuts the connection to the camera. View button Displays the image selected in thumbnail view enlarged in a separate window. M Histogram Shows the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 154
for shooting (the lens is not attached, etc.), you cannot perform the operation as shown below. Taking Shots from Your Computer 1 Set the camera up ready to shoot. 2 Make various settings. ● For information on how to set the size and image quality, refer to "Shooting window" (➞M-46). ● See "Default - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 155
To rotate a downloaded image, select the image and then select [Rotate Saved Image 90 degree Right] or [Rotate Saved Image 90 degree Left] in the [Edit] menu. M ● By selecting [Camera Setting] from the [File] menu, you can specify the camera settings. See "Specifying the Camera Settings" (➞M-42 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 156
are taken. Select [Display Shooting Modes] in the [File] menu. \ The [Shooting Settings] dialog box appears, displaying the camera settings used when images are taken. ● Clicking the [OK] button closes the [Shooting Settings] dialog box. Printing Images You can print images. All the images shown in - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 157
you can also specify Detailed Settings to make shooting settings from your computer remotely. Default Settings Use the procedure below to [Preferences] dialog box appears. 2 Specify the desired settings and click the [OK] button. \ The settings are saved and the [Preferences] dialog box closes - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 158
captured images both on your computer and on the CF card in the camera. 3 Use this field to enter a file name when saving a captured image. * The file name can consist of up to 16 characters. 4 Sets the number of digits in the sequence number that follows the file name and the starting number - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 159
camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings. ● The shooting settings cannot be specified if the camera's shooting mode is set to the Basic zone. Set the camera's shooting mode to the Creative zone. M 1 Display the Detailed Settings window - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 160
you to specify ISO Speed. 5 Allows you to specify Color Temperature. 6 Allows you to specify the Av (aperture value) and Tv (shutter speed) settings. (The specifiable settings are only displayed when Shutter-priority AE, Aperture-priority AE or Manual Exposure is selected as the shooting mode on the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 161
: Double-click the [Canon Utilities] folder s the [ImageBrowser] folder s [ReadMe]. Help: Displayed by selecting [ImageBrowser Help] in the Help menu. Software User Guide: View by downloading from the Canon website. See "ZoomBrowser EX/ImageBrowser Software User Guide" (➞A-8) for details. - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 162
] dialog box appears. 3 Confirm that [USB Port] is selected in the [Port] list box and that [EOS 10D] is selected in the [Detected Camera] list box, then click the [Set] button. \ The Camera window and Browser window appear. ● The [Communication Settings] dialog box only appears the first time - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 163
is selected, click the [OK] button. \ The Camera window appears. ● When the [Download images] radio button is selected, click the [Next] button and then proceed as instructed by the on-screen messages. \ The images on the camera are downloaded. ● When you select the [Launch RemoteCapture] radio - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 164
[ImageBrowser] icon. OS 9 OS X \ When you start ImageBrowser, the Browser window appears. Then, when the connection to the camera opens, the Camera window appears. Folders area Browser Window The [RAW] symbol is displayed for RAW images. Browser area Displays the images in the folder selected - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 165
card will be displayed here. Camera window The [RAW] symbol is displayed for RAW images. No symbol is shown for JPEG images. Thumbnail M Sets various camera settings. See "Specifying the Camera Settings" (➞M-42) for information on how to set. Reconnects the camera to your computer. Allows you - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 166
to prevent ImageBrowser for OS 9 from starting up automatically when you connect the camera to your computer. 1 Select the Apple menu s [Control Panels] s [Canon ImageBrowser Auto Launch]. \ The [Settings for USB connection] dialog box appears. 2 Uncheck the [The application program below will start - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 167
. ● To display the images on the camera, click the [CANON CAMERA] button. ● When you click the [CANON CAMERA] button, the [Communication Settings] dialog box may appear. M Select [USB Port] from the [Port] list box, and select [EOS 10D] from the [Detected Camera] list box, then click the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 168
the folder name. ● Once you have typed in the folder name, leave the folder selected. 4 Select the images you wish to download from the Camera window and click the [DOWNLOAD] button. ● Click a thumbnail to select one of the displayed images. You can select multiple images by holding down the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 169
you want to print on the Canon perforated paper. (This option is not displayed if you are using a printer that does not support printing on perforated paper.) Working with Images in ImageBrowser Selecting the [Custom layout printing] radio button allows you to set any position or size for your - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 170
. 6 Set the paper size and orientation, and then click the [OK] button. \ The page setup window in the [Layout Options] dialog box appears again. 7 Click the [OK] button. \ The print window appears. 8 Edit the print window and click the [PRINT] button. \ The Printer Setup dialog box appears. M-64 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 171
"Album" by selecting [Save] from the [File] menu. ● Adding images to the page You can drag and drop displayed images from the Browser window to the Print window. ● Changing the image angle Select the image and then click the [ROTATE] button. Then select [90 degrees right], [90 degrees left] or [180 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 172
image size or angle. 9 Select the printer to be used, specify the print settings and print images. ● The [Custom layout printing] radio button in the [Layout print an index or print onto Canon perforated paper (supported on OS 9 only). ● The settings available in step 3 vary depending on type of printing - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 173
option to automatically correct only images shot with Exif 2.2 compliant cameras. Working with Images in ImageBrowser 3 Print images. (➞M-63) ● Images shot on camera that comply with Exif 2.2 incorporate recorded information on the settings used when the shot was taken. The Exif Print correction - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 174
then select [PhotoStitch] in the [Edit] menu. \ PhotoStitch starts up. ● Follow the instructions in the guidance window to merge the images. ● Please refer to the PhotoStitch Help menu for more details. ● You cannot open RAW images in PhotoStitch. ● Up to four images can be merged using PhotoStitch - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 175
6M Troubleshooting and Uninstallation This chapter provides a troubleshooting manual and describes the software uninstallation procedures. 6 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 176
. (➞ "Installing and Removing the Battery" in the EOS 10D Instructions.) ● Do you have more than one camera connected to your computer? If you connect more than one camera to the same computer, the driver and camera may not operate normally. ➞ Close the software and disconnect all the interface - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 177
s [Preferences] to open the [Preferences] folder and delete the target preference files. M • Canon CameraCom Pref Communications and default settings file shared by all software programs • CanonFileViewerUtility Pref Preferences file for FileViewer Utility • RemoteCapture Pref Preferences file - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 178
as an example to illustrate how to uninstall the software. The same procedure can be used to uninstall other software products. 1 Display the folder in which the software is saved. ● Open the [Canon Utilities] folder. 2 Drag the folder for the software to be uninstalled to the Trash and empty the - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 179
supplied CD-ROM. PDF File Location and Opening Instructions Place the Adobe Photoshop Elements 2.0 CD-ROM in the drive. The window will open automatically and show folders with language names. Double-click the appropriate language folder and the [Support.pdf] file within it. ● To read PDF files - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 180
M-44 Settings Dialog Box Camera Settings M-42 Default Settings M-51 Detailed Settings M-53 Preferences M-40 Sharpness M-31 Software Window File Viewer Utility Main Window ........ M-13 ImageBrowser Browser Window M-58 Camera Window M-59 RemoteCapture Save Window M-47 Shooting Window M-46 - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 181
MEMO - Canon EOS 10D | SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 182
INC. 12-15 Mita, 3-Chome, Minato-ku, Tokyo 108-8011, Japan This Instructions booklet is current as of February 2003. For information on using the camera with system accessories introduced after this date, contact your nearest Canon Service Center. CT1-1242-001 © CANON INC. 2003 PRINTED IN JAPAN
Software
EOS DIGITAL SOLUTION DISK
Ver. 5
Please read these instructions carefully before using
the EOS 10D software.
This guide should be kept in a safe place so that it
can be used for future reference.
INSTRUCTIONS
English Edition
ยด
Macintosh
Windows