Canon EOS 10D SOFTWARE INSTRUCTIONS EOS DIGITAL SOLUTION DISK Ver.5 - Page 92
To Display the Device Manager
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Troubleshooting ● Is the driver installed correctly? Connect the camera to your computer with the interface cable and set the camera's main switch to (➞W-10) and open [Device Manager] (➞below). Click the plus symbol [+] to the left of [Other devices] or [Unknown devices] and check whether [EOS 10D] or [Canon Digital Camera] is displayed. ➞ If [EOS 10D] or [Canon Digital Camera] is displayed in [Other devices] or [Unknown devices], the driver was not installed correctly. Use the following procedure to re-install the driver. 1 Delete [EOS 10D] or [Canon Digital Camera] displayed in [Other devices] or [Unknown devices]. 2 Disconnect the interface cable and uninstall the driver. (➞W-82) 3 Re-install the driver. (➞W-4) To Display the Device Manager ● Windows XP ➞ Click the [Start] button and select [Control Panel] s [Performance and Maintenance] s [System]. Then select the [Hardware] tab and click the [Device Manager] button. ● Windows 2000 ➞ Click the [Start] button and select [Settings] s [Control Panel]. Then double-click the [System] icon to open and select the [Hardware] tab and click the [Device Manager] button. ● Windows Me and Windows 98 SE ➞ Click the [Start] button and select [Settings] s [Control Panel]. Then double-click the [System] icon to open and select the [Device Manager] tab. W-80