Canon SX10IS PowerShot SX10 IS Camera User Guide - Page 124
Selecting a Subject to Focus On, Face Select and Track
UPC - 013803100785
View all Canon SX10IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
122 Selecting a Subject to Focus On (Face Select and Track) Available Shooting Modes p. 284 Once the focus is fixed to a subject's face, the frame can be set to follow the subject within a certain range. Set the AF frame mode in the menu to [Face Detect] in advance (p. 118). 1 Select a face to focus on. 1. Press the button while faces are detected by the camera. • The camera enters face select mode, and the face frame ( ) of the main subject displays in green. Even if the subject moves, the frame will follow the subject within a certain range. Face Frame • The face frame will not display when a face is not detected. 2. Select the person you wish to focus on. • When several faces have been detected, pressing the or button or turning the control dial will move the face frame to another subject. • Holding down the DISP. button for more than 1 second will display face frames (up to 35) of all the detected faces (green: face of main subject, white: detected faces). Face Frame 3. Press the button again. • The camera exits face designation mode, and the face frame ( ) of the main subject will change to white (the frame will continue to follow the subject within a certain range). • Holding the mode. button pressed will release the face detection