Canon SX10IS PowerShot SX10 IS Camera User Guide - Page 150

148 Saving Original Images Not only can you save images with altered colors when shooting still images with the Color Accent or Color Swap modes, but you can also choose to save the original images (before the color change). 1 Select [Save Original]. 1. Press the MENU button. 2. In the menu, use the or button to select [Save Original]. 2 Make settings. 1. Use the or button to select [On] or [Off]. 2. Press the MENU button. You cannot save the originals of still images taken while shooting a movie in Color Accent or Color Swap mode. If [Save Original] is set to [On] - The transformed image is reviewed in the LCD monitor (or the viewfinder) after shooting in the Color Accent or Color Swap mode. If you erase the image at this point, the original image is erased along with the transformed image. Exercise adequate caution before deleting a file. - Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed in the LCD monitor (or the viewfinder) when this function is set to [Off]. - The images are numbered consecutively. The original images are assigned the lower number and the transformed color accent or color swap images the next number.