Canon Vixia HF S11 VIXIA HF S11 Instruction Manual - Page 66

• When the memory is initialized, music files on the recording media that was initialized will be erased as well. Use the supplied software Music Transfer Utility to transfer music files from the supplied Music Data CD-ROM to the camcorder. For details, refer to the 'Music Transfer Utility Software Guide' (PDF file). • The Music Data CD-ROM includes also extra music tracks that were not pre-installed in the built-in memory. • Video snapshot is deactivated if the camcorder is switched to playback mode or if the camera mode dial is set to . • Transfer music files to the same memory that contains the video snapshot scenes you want to play back. • When music files are transferred to the built-in memory or to a memory card after repeatedly recording and deleting recordings (fragmented memory), the movies and background music track may not be played back correctly. In such case, we recommend saving your recordings on a computer ( 123), initializing the memory ( 41), transferring the music files and only then writing the video files back to the camcorder. • If the USB cable is disconnected while transferring music files to the camcorder, it may not be possible to correctly play back those music tracks. Delete the music tracks from the camcorder, and transfer the music files again. Pre-recording Function The camcorder will start recording 3 seconds before you press START/STOP , ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording. Operating modes: 1 Open ( ) the joystick guide. 2 Select ( ) [ Pre REC] and press . • appears. • Press again to turn pre-recording off. 3 Press START/STOP . The scene recorded in the memory will start 3 seconds before START/STOP was pressed. Pre REC 66 Š Video