Canon ZR60 ZR70 ZR65 Instruction Manual - Page 104
Recording Still Images on a Memory Card
UPC - 490561400607
View all Canon ZR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Recording Still Images on a Memory Card You can record still images with the E camcorder, from a tape in the camcorder ( 105), or from devices connected via the DV terminal or AV terminal ( 106). Card access indicator PHOTO button ❍ Do not turn off the camcorder, disconnect the power source or remove the memory card while the card access display (>) in the upper right corner of the screen or the card access indicator is flashing. Doing so could result in data damage. ❍ When you are using a SD Memory Card, make sure that the protect switch is set to allow recording. Make sure to insert a memory card with enough remaining capacity. ZR70 MC ZR65 MC Using a Memory Card Recording with the Camcorder CAMERA PLAY (VCR) CARD CAMERA CARD PLAY (VCR) PHOTO 1. Set the camcorder to CARD CAMERA mode. The remaining image capacity and other information appear. 2. Press the PHOTO button halfway. • F flashes in white and turns green when focus is adjusted. • Exposure is locked. • When you press the PHOTO button on the wireless controller, recording starts immediately. 3. Press the PHOTO button fully. • You hear a shutter sound, and the screen appears as if a shutter has been released. • The card access indicator flashes. • The still image shown on the screen will be recorded on the memory card. To use the self-timer ( 70), press the (self-timer) button before step 2 and press the PHOTO button fully. PHOTO 104