Canon ZR60 ZR70 ZR65 Instruction Manual - Page 92

Converting Analog Signals into Digital Signals (Analog-Digital Converter) E By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as output terminal only. ❍ Headphones cannot be used during analog-digital conversion. ❍ Unload the tape from the camcorder. ❍ Turn off all devices before starting the connections. ❍ Depending on the signal sent from the connected device, the conversion from analog to digital signals might not work properly (e.g., signals that include copyright protective signals or anomalous signals such as ghost signals, etc.) We recommend powering the camcorder from a household power source. Connecting the Devices This illustration shows how to connect using a S-video cable. You can also connect the yellow plug of the stereo video cable to the VIDEO terminal. Refer also to the instruction manual of the connected device. S Signal flow S-150 S-video Cable (optional) AV Signal flow STV-250N Stereo Video Cable (supplied) OUTPUT S(S1)-VIDEO VIDEO L AUDIO R Editing DV Signal flow Commercially available DV cable 92