Canon ZR60 ZR70 ZR65 Instruction Manual - Page 96

Audio Dubbing You can add sound from audio devices (AUDIO IN) or with the built-in or an external E microphone (MIC. IN). ❍ Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode, 16-bit or 12-bit 4-channel sound. In above case, create a copy in SP mode 12-bit audio sound using the analog line-in function. ❍ Do not connect/disconnect any cable to/from the camcorder while dubbing. ❍ You cannot use the DV terminal for audio dubbing. ❍ If you add sound to a tape not recorded with this camcorder, sound quality may decrease. ❍ Sound quality may decrease when you add sound to the same scene for more than 3 times. Connecting an Audio Device Editing AV Signal flow L STV-250N Stereo Video Cable (supplied) R ❍ Make sure that "H" is not displayed on the screen. If "H" is displayed, change the setting ( 39). ❍ You can monitor the picture on the LCD screen or a TV connected via the S-video terminal, and check the sound with the built-in speaker. 96