Canon ZR60 ZR70 ZR65 Instruction Manual - Page 16
Attaching and Charging the Battery Pack - power cord
UPC - 490561400607
View all Canon ZR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Attaching and Charging the Battery Pack Charge the battery pack with the supplied power adapter before you use the E camcorder for the first time and subsequently when the message "CHANGE THE BATTERY PACK" appears. 1. Turn the POWER switch to OFF. 2. Move the viewfinder upward. 3. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Align the end of the battery pack with the line on the camcorder, press lightly and slide it in the direction of the arrow until it clicks. w q POWER CAMERA OFF(PVLCARY) e click Mastering the Basics 4. Connect the power cord to the adapter. 5. Plug the power cord into a power outlet. 6. Connect the power adapter to the camcorder's DC IN terminal. 7. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the adapter. 8. Remove the battery pack after use. Press the BATT. button to remove the battery. CARD/ CHARGE CHARGE indicator y r t DC IN terminal DC IN 8.4V ❍ The battery pack may be defective when the CHARGE indicator flashes rapidly. ❍ The CHARGE indicator informs you about the charge status. 0-50%: Flashes once every second More than 50%: Flashes twice every second 100%: Glows steadily ❍ Do not disconnect and reconnect the power cord while charging a battery pack. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and 16 attach it back to the camcorder.