Canon ZR60 ZR70 ZR65 Instruction Manual - Page 22

Loading a Cassette Use only videocassettes marked with the D logo. E Loading and Unloading 1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover. The cassette compartment opens automatically. 2. Load/unload the cassette. Tape w protection tab q • Load the cassette with the window facing the grip belt and the REC/SAVE tab facing upward. OPEN/EJECT PUSH • Unload the cassette by pulling it straight out. e 3. Press the P mark on the cassette compartment until it clicks. Wait for the cassette compartment to retract automatically. 4. Close the cassette compartment cover. click r Mastering the Basics ❍ Do not interfere with the cassette compartment while it is opening or closing automatically or attempt to close the cover until the cassette compartment has fully retracted. ❍ Be careful not to get your fingers caught in the cassette compartment cover. ❍ If the camcorder is connected to a power source, cassettes can be loaded/unloaded even if the POWER switch is set to OFF. ❍ v flashes if no cassette is inserted when turning on the power (in CAMERA and PLAY (VCR) mode). ❍ With some types of tapes, the remaining tape display may not be accurate. 22