Canon ZR60 ZR70 ZR65 Instruction Manual - Page 87
Recording to a VCR or Digital Video Device - dv cable
UPC - 490561400607
View all Canon ZR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Recording to a VCR or Digital Video Device You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no E generation loss in image and sound quality. When connecting a VCR: ❍ Make sure that "H" is not displayed on the screen. If "H" is displayed, change the setting ( 39). ❍ The quality of the edited tape will be slightly lower than that of the original. When connecting a digital video device: ❍ You can connect only one device to the camcorder with the DV cable. ❍ Blank sections may be recorded as anomalous picture. ❍ If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. Example: Recording to a VCR CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA Editing 1. Connect the camcorder to the VCR. See Playing Back on a TV Screen ( 41). 2. Set the camcorder to PLAY (VCR) mode and load a recorded cassette. 3. Connected device: Load a blank cassette and set the device to record pause mode. 4. Locate the scene you wish to copy and pause playback shortly before the scene. 5. Play back the tape. 6. Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete. 7. Stop playback. 87