Canon iPF710 iPF710 User Manual - Page 624

Problems with the printing quality Paper rubs against the Printhead Cause Corrective Action The paper type as specied in the printer driver does Load paper of the same type as you have specied not match the type loaded in the printer. (*1) in the printer driver. (→P.110) (→P.135) Make sure the same type of paper is specied in the printer driver as you have loaded in the printer. 1.Hold down the Stop button for a second or more to cancel printing. 2.Change the paper type in the printer driver and try printing again. Paper has been loaded incorrectly, causing it to wrinkle. Reload the paper. (→P.110) (→P.135) The Printhead is set too low. In Head Height, choose Automatic. (→P.548) You are printing on heavyweight paper or paper that curls or wrinkles easily after absorbing ink. When printing on Heavyweight Coated Paper or other paper-based media, choose a VacuumStrngth setting of Strong, or Strongest. If the paper is still scratched, try setting the Printhead level in Head Height to Highest. (→P.557) (→P.548) When printing on CAD Tracing Paper or other lm-based media, choose a VacuumStrngth setting of Standard, Strong, or Strongest. If the paper is still scratched, try setting the Printhead level in Head Height to Highest. (→P.557) (→P.548) When printing on paper 0.1 mm (0.004 in) thin or thinner, choose a VacuumStrngth setting of Weakest. If the paper is still scratched, try setting the Printhead level in Head Height to Highest. (→P.557) (→P.548) *1: Always make sure the loaded paper matches the media type setting on the printer. 610 Troubleshooting