Cisco 7206VXR Installation Guide - Page 24

Software Requirements Chapter 1 Product Overview Table 1-1 Cisco 7206 Physical Specifications (continued) Description Specification DC voltages supplied and maximum, steady-state current ratings +5.2V @ 30A +12.2V @ 9A -12.0V @ 1.5A +3.5V @ 13A DC-input cable Airflow In accordance with local and national wiring regulations ~80 cfm8 Temperature 32 to 104°F (0 to 40°C) operating; -4 to 149°F (-20 to 65°C) nonoperating Humidity 10 to 90% noncondensing 1. Mbps = megabits per second. 2. Btu = British thermal units. 3. VAC = volts alternating current. 4. A = amperes. 5. Hz = hertz. 6. AWG = American Wire Gauge. 7. VDC = volts direct current. 8. cfm = cubic feet per minute. Note For a chassis footprint, additional dimensions, and clearance requirements for the Cisco 7206 perimeter, refer to Chapter 2, "Preparing for Installation," the "Site Requirements" section on page 2-2. Software Requirements Cisco IOS requirements for the Cisco 7206 are listed below: • Cisco IOS Release 11.1(17)CA or a later release of Cisco IOS 11.1 CA • Cisco IOS Release 11.2(12)P or a later release of Cisco IOS 11.2 P • Cisco IOS Release 11.3(2)T or a later release of Cisco IOS 11.3 T • Cisco IOS Release 12.0(3)T or a later release of Cisco IOS 12.0 T Note For software information for the Cisco AS5800 Universal Access Server, refer to the Cisco AS5800 Universal Access Server documentation listed on Cisco.com at http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5800/index.htm. Cisco 7206 Installation and Configuration Guide 1-6 OL-5102-02