Cisco 7206VXR Installation Guide - Page 59
Cisco 7206 Footprint and Outer Dimensions, shows the chassis footprint
UPC - 746320975061
View all Cisco 7206VXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 2 Preparing for Installation Figure 2-1 Cisco 7206 Footprint and Outer Dimensions Network processing engine width 13.8 in. (35.05 cm) Site Requirements Chassis depth (including cable service loop and port adapter cables) 26 in. (66.04 cm) Chassis depth 17.0 in. (43.18 cm) Fan tray depth 15.81 in. (40.16 cm) H6238 Card cage and I/O controller width 13.5 in. (34.29 cm) Chassis width 16.8 in. (42.67 cm) When planning your rack installation, consider the following guidelines: • Install the Cisco 7206 in an open rack whenever possible. If installation in an enclosed rack is unavoidable, ensure that the rack has adequate ventilation. Note To prevent chassis overheating, never install the Cisco 7206 in an enclosed rack or room that is not properly ventilated or air conditioned. • If you plan to use an equipment shelf, ensure that the shelf is constructed to support the weight and dimensions of the chassis. Figure 2-1 shows the chassis footprint, which you will need if you are designing a customized shelf. We recommend that you use the rack-mount kit designed for the Cisco 7206. • Allow sufficient clearance around the rack for maintenance. If the rack is mobile, you can push it back near a wall or cabinet for normal operation and pull it out for maintenance (installing or moving port adapters, connecting cables, or replacing or upgrading components). Otherwise, allow 19 inches (48.3 cm) of clearance to remove Cisco 7206 FRUs. OL-5102-02 Cisco 7206 Installation and Configuration Guide 2-5