Cisco 7206VXR Installation Guide - Page 39
Color, Function,
UPC - 746320975061
View all Cisco 7206VXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 1 Product Overview Field-Replaceable Units Figure 1-14 C7200-I/O-FE=-LEDs and CPU Reset Button-with Fast Ethernet Port (Single MII Port) H6523 ENABLED FAST ETHERNET INPUT/OUTPUT CONTROLLER ENABLED SLOT 1 SLOT 0 EFNEABFLEELINCKPU RESPEOTWER IO OK LEDs are either on or off. The LED state (on or off), not the color, determines the status of connection as described in Table 1-7. However, most LEDs are green when on, with the exception of the IO POWER OK LED, which is orange when in the on state. Table 1-7 I/O Controller LEDs LED ENABLED Color Green IO POWER OK Orange FE ENABLE Green FE LINK 1 Green MII EN Green RJ45 EN Green Function Indicates that the network processing engine and the I/O controller are enabled for operation by the system; however, it does not mean that the Fast Ethernet port on the I/O controller is functional or enabled. This LED comes on during a successful router boot and remains on during normal operation of the router. Indicates that the I/O controller is on and receiving DC power from the router midplane. This LED comes on during a successful router boot and remains on during normal operation of the router. Indicates that the Fast Ethernet port is initialized and enabled for operation by the system. This LED comes on after the I/O controller has been enabled and remains on during normal operation of the router. Indicates that the Fast Ethernet port has established a valid link with the network. This LED remains off during normal operation of the router, unless there is an incoming carrier signal. Indicates that the Fast Ethernet MII port is initialized and enabled by the system, and is configured for operation. This LED comes on after the I/O controller has been enabled and the MII port has been configured as the media type for the Fast Ethernet port (the RJ-45 port is the default media type for the Fast Ethernet port). This LED remains on during normal operation of the router. Indicates that the Fast Ethernet RJ-45 port (the default media type for the Fast Ethernet port) is initialized and enabled by the system. This LED comes on after the I/O controller has been enabled and remains on during normal operation of the router. OL-5102-02 Cisco 7206 Installation and Configuration Guide 1-21