Cisco CISCO876-SEC-I-K9 Configuration Guide - Page 131
console, flowcontrol, software, hardware, Step 17
UPC - 882658021800
View all Cisco CISCO876-SEC-I-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 13 Configuring Dial Backup and Remote Management Configuring Dial Backup and Remote Management Through the Console or Auxiliary Port Step 17 Command line [aux | console | tty | vty] line-number [ending-line-number] Purpose Enters configuration mode for the auxiliary interface. Example: Router(config)# line aux 0 Router(config)# Step 18 flowcontrol {none | software [lock] [in | out] | Enables hardware signal flow control. hardware [in | out]} Example: Router(config)# flowcontrol hardware Router(config)# Configuration Example The following configuration example specifies an IP address for the ATM interface through PPP/IPCP address negotiation and dial backup over the console port. ! ip name-server 192.168.28.12 ip dhcp excluded-address 192.168.1.1 ! ip dhcp pool 1 import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 ! ! Need to use your own correct ISP phone number. modemcap entry MY-USER_MODEM:MSC=&F1S0=1 chat-script Dialout ABORT ERROR ABORT BUSY "" "AT" OK "ATDT 5555102\T" TIMEOUT 45 CONNECT \c ! ! ! ! interface vlan 1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip tcp adjust-mss 1452 hold-queue 100 out ! ! Dial backup and remote management physical interface. interface Async1 no ip address encapsulation ppp dialer in-band dialer pool-member 3 async default routing async dynamic routing async mode dedicated ppp authentication pap callin ! OL-5332-01 Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide 13-13