Cisco CISCO876-SEC-I-K9 Configuration Guide - Page 62
Configuration Example, Verify Your DHCP Configuration
UPC - 882658021800
View all Cisco CISCO876-SEC-I-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Configure DHCP Chapter 5 Configuring a LAN with DHCP and VLANs Command Step 9 domain-name domain Purpose Specifies the domain name for a DHCP client. Example: Router(config-dhcp)# domain-name cisco.com Router(config-dhcp)# Step 10 exit Example: Router(config-dhcp)# exit Router(config)# Exits DHCP configuration mode, and enters global configuration mode. Configuration Example The following configuration example shows a portion of the configuration file for the DCHP configuration described in this chapter. ip dhcp excluded-address 192.168.9.0 ! ip dhcp pool dpool1 import all network 10.10.0.0 255.255.255.0 default-router 10.10.10.10 dns-server 192.168.35.2 domain-name cisco.com ! ip domain name smallbiz.com ip name-server 192.168.11.12 Verify Your DHCP Configuration Use the following commands to view your DHCP configuration. • show ip dhcp import-Displays the optional parameters imported into the DHCP server database. • show ip dhcp pool-Displays information about the DHCP address pools. • show ip dhcp server statistics-Displays the DHCP server statistics, such as the number of address pools, bindings, and so forth. Router# show ip dhcp import Address Pool Name: dpool1 Router# show ip dhcp pool Pool dpool1 : Utilization mark (high/low) : 100 / 0 Subnet size (first/next) : 0 / 0 Total addresses : 254 Leased addresses : 0 Pending event : none 1 subnet is currently in the pool : Current index IP address range 10.10.0.1 10.10.0.1 - 10.10.0.254 Leased addresses 0 Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide 5-4 OL-5332-01