Cisco CP-7975G Administration Guide - Page 134
Device > Phone >, Phone Configuration, Apply Config, FAC or Client Matter Codes CMC dialing is
View all Cisco CP-7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Telephony Features Available for the Phone Chapter 5 Configuring Features, Templates, Services, and Users Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Do Not Disturb (DND) Enbloc Dialing (SCCP phones only) Fast Dial Service Description Configuration Reference When DND is turned on, either no audible rings occur during the ringing-in state of a call, or no audible or visual notifications of any type occur. Cisco Unified Communications Manager Features and Services Guide, Do Not Disturb. You can configure the phone to have a softkey template with a DND softkey or a phone-button template with DND as one of the selected features. The following DND-related parameters are configurable in Cisco Unified Communications Manager Administration: • Do Not Disturb-Choose Device > Phone > Phone Configuration. • DND Option-Choose "Call Reject" (to turn off all audible and visual notifications), or "Ringer Off" (to turn off only the ringer). DND Option appears on both the Common Phone Profile window and the Phone Configuration window (Phone Configuration window value takes precedence). • DND Incoming Call Alert-Choose the type of alert to play, if any, on a phone for incoming calls when DND is active. This parameter is located on both the Common Phone Profile window and the Phone Configuration window (Phone Configuration window value takes precedence). • BLF Status Depicts DND-Enables DND status to override busy/idle state. Enbloc dialing enables SCCP to send all digits of a phone number simultaneously. This feature must be disabled if either Forced Authorization Codes (FAC) or Client Matter Codes (CMC) dialing is being used. To disable enbloc dialing, in Cisco Unified Communications Manager Administration, go to Device > Phone. On the Phone Configuration window, in the Product Specific Configuration Layout area, uncheck the Enbloc Dialing check box, then click Apply Config, then click Save. Allows a user to enter a Fast Dial code to place a call. Fast Dial codes can be assigned to phone numbers or Personal Address Book entries. (See "Services" in this table.) For more information, refer to: • Cisco Unified Communications Manager Administration Guide, Cisco Unified IP Phone Configuration. • Cisco Unified Communications Manager System Guide, Cisco Unified IP Phone Services. 5-10 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 OL-23092-01