Cisco CP-7975G Administration Guide - Page 39
Installing Cisco Unified IP Phones, Checklist for Installing the Cisco Unified IP Phone 7975G
View all Cisco CP-7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 1 An Overview of the Cisco Unified IP Phone Installing Cisco Unified IP Phones Installing Cisco Unified IP Phones After you have added the phones to the Cisco Unified Communications Manager database, you can complete the phone installation. You (or the phone users) can install the phone at the users's location. The Cisco Unified IP Phone Installation Guide, which is available on cisco.com, provides directions for connecting the phone handset, cables, and other accessories. Note Before you install a phone, even if it is new, upgrade the phone to the current firmware image. For information about upgrading, refer to the Readme file for your phone, which is located at: http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser After the phone is connected to the network, the phone startup process begins and the phone registers with Cisco Unified Communications Manager. To finish installing the phone, configure the network settings on the phone depending on whether you enable or disable DHCP service. If you used auto-registration, you need to update the specific configuration information for the phone such as associating the phone with a user, changing the button table, or directory number. Checklist for Installing the Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Table 1-8 provides an overview and checklist of installation tasks for the Cisco Unified IP Phones 7975G, 7971G-GE, 7970G, 7965G, and 7945G. The list presents a suggested order to guide you through the phone installation. Some tasks are optional, depending on your system and user needs. For detailed procedures and information, refer to the sources in the list. Table 1-8 Checklist for Installing the Cisco Unified IP Phones Task Purpose For More Information 1. Choose the power source for the phone: See Providing Power to the Phone, page 2-4. • Power over Ethernet (PoE) • External power supply Determines how the phone receives power. 2. Assemble the phone, adjust phone placement, and See Installing the Cisco Unified IP Phone, page 3-5. connect the network cable. See Adjusting the Placement of the Cisco Unified IP Locates and installs the phone in the network. Phone, page 3-11. OL-23092-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 1-25