Cisco CP-7975G Administration Guide - Page 66
Each Cisco Unified IP Phone ships with one Ethernet cable, Before You Begin
View all Cisco CP-7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Installing the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone Note Before you install a phone, even if it is new, upgrade the phone to the current firmware image. Before using external devices, read Using External Devices, page 3-5 for safety and performance information. Before You Begin Remove the hookswitch clip, if necessary (see Handset, page 3-3), from the cradle area. To install a Cisco Unified IP Phone, perform the tasks described in Table 3-1: Table 3-1 Installing the Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Task Purpose Related Topics 1. Connect the handset to the Handset port. - 2. (Optional) Connect a headset to the Headset port. See Headset, page 3-3 for supported headsets. You can add a headset later if you do not connect one now. 3. (Optional) Connect a wireless headset. Refer to the wireless headset documentation for You can add a wireless headset later if you do not want to information. connect one now. Note The Cisco Unified IP Phone 7971G-GE and 7970G do not support wireless headsets. 4. (Optional) Connect the power supply to the Cisco DC See Providing Power to the Phone, page 2-4. Adapter port. 5. Connect a straight-through Ethernet cable from the switch See Network and Access Ports, page 3-2 for to the 10/100/1000 SW port on the Cisco Unified IP Phone guidelines. 7975G and 7971G-GE, or to the 10/100 SW port on the Cisco Unified IP Phone 7970G, 7965G and 7945G. Each Cisco Unified IP Phone ships with one Ethernet cable in the box. You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for 100 Mbps connections and Category 5e/6 for 1000 Mbps connections 6. Connect a straight-through Ethernet cable from another See Network and Access Ports, page 3-2 for network device, such as a desktop computer, to the guidelines. 10/100/1000 PC port on the Cisco Unified IP Phone 7975G and 7971G-GE, or to the 10/100 SW port on the Cisco Unified IP Phone 7970G, 7965G and 7945G. Optional. You can connect another network device later if you do not connect one now. You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for 100 Mbps connections and Category 5e/6 for 1000 Mbps connections. Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 3-6 OL-23092-01