Cisco CP-7975G Administration Guide - Page 176

Status Menu Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Table 7-2 Status Messages on the Cisco Unified IP Phone (continued) Message Trust List updated Version error XmlDefault corresponding to the phone device name Description The CTL file, the ITL file, or both files are updated. The name of the phone load file is incorrect. Name of the configuration file. Possible Explanation and Action None. This message is informational only. For more information about the Trust List, refer to Cisco Unified Communications Manager Security Guide. Make sure that the phone load file has the correct name. None. This is an informational message indicating the name of the configuration file for the phone. Network Statistics Screen The Network Statistics screen displays information about the phone and network performance. Table 7-3 describes the information that displays in this screen. To display the Network Statistics screen, follow these steps: Procedure Step 1 Step 2 Step 3 Press the Settings button. Select Status. Select Network Statistics. To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey. To exit the Network Statistics screen, press the Exit softkey. Table 7-3 Network Statistics Message Components Item Rx Frames Tx Frames Rx Broadcasts Description Number of packets received by the phone Number of packets sent by the phone Number of broadcast packets received by the phone 7-10 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 OL-23092-01