Cisco CP-7975G Administration Guide - Page 64

Understanding the Cisco Unified IP Phone Components Chapter 3 Setting Up the Cisco Unified IP Phone the remote party and the Cisco Unified IP Phone user. Humming or buzzing sounds can be caused by a range of outside sources; for example, electric lights, electric motors, or large PC monitors. See Using External Devices, page 3-5, for more information. Note In some cases, hum may be reduced or eliminated by using a local power cube or power injector. These environmental and hardware inconsistencies in the locations where Cisco Unified IP Phones are deployed means that there is not a single headset solution that is optimal for all environments. Cisco recommends that customers test headsets in their intended environment to determine performance before making a purchasing decision and deploying en mass. Note The Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G support wideband headsets. Audio Quality Subjective to the User Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound good to the user and the party on the far end. Sound quality is subjective and Cisco cannot guarantee the performance of any headsets or handsets. However, a variety headsets from leading headset manufacturers have been reported to perform well with Cisco Unified IP Phones. See manufacturer's sites for details. For information about wireless headsets that work in conjunction with the wireless headset remote hookswitch control feature, go to the following URL: http://www.cisco.com/pcgi-bin/ctdp/Search.pl 1. Choose IP Communications from the Enter Solution drop-down list box. The Select a Solution Category drop-down list box displays. 2. Choose IP Phone Headsets to see a list of Technology Development Program partners. If you want to search for a particular Technology Development Program partner, enter the partner's name in the Enter Company Name box. Note The Cisco Unified IP Phone 7971G-GE and 7970G do not support wireless headsets. Connecting a Headset To connect a headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the phone. Press the Headset button on the phone to place and answer calls by using the headset. You can use the headset with all of the features on the Cisco Unified IP Phone, including the Volume and Mute buttons. Use these buttons to adjust the ear piece volume and to mute the speech path from the headset microphone. The wireless headset remote hookswitch control feature allows you to use a wireless headset with the Cisco Unified IP Phone. Refer to the wireless headset documentation for information about connecting the headset and using the features. Disabling a Headset You can disable the headset by using Cisco Unified Communications Manager Administration. If you do so, you also will disable the speakerphone. Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 3-4 OL-23092-01