Cisco CP-7975G Administration Guide - Page 210
Eliminating DNS or Other Connectivity Errors, Checking Power Connection
View all Cisco CP-7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Troubleshooting Cisco Unified IP Phone Security Chapter 9 Troubleshooting and Maintenance Eliminating DNS or Other Connectivity Errors If the phone continues to reset, follow these steps to eliminate DNS or other connectivity errors: Procedure Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Use the Erase softkey to reset phone settings to their default values. See Resetting or Restoring the Cisco Unified IP Phone, page 9-14 for details. Modify DHCP and IP settings: a. Disable DHCP. See Network Configuration Menu, page 4-5 for instructions. b. Assign static IP values to the phone. See Network Configuration Menu, page 4-5 for instructions. Use the same default router setting used for other functioning Cisco Unified IP Phones. c. Assign TFTP server. See Network Configuration Menu, page 4-5 for instructions. Use the same TFTP server used for other functioning Cisco Unified IP Phones. On the Cisco Unified Communications Manager server, verify that the local host files have the correct Cisco Unified Communications Manager server name mapped to the correct IP address. From Cisco Unified Communications Manager, choose System > Server and verify that the server is referred to by its IP address and not by its DNS name. From Cisco Unified Communications Manager, choose Device > Phone and verify that you have assigned the correct MAC address to this Cisco Unified IP Phone. For information about determining a MAC address, see Determining the MAC Address of a Cisco Unified IP Phone, page 2-15. Power cycle the phone. Checking Power Connection In most cases, a phone will restart if it powers up by using external power but loses that connection and switches to PoE. Similarly, a phone may restart if it powers up by using PoE and then gets connected to an external power supply. Troubleshooting Cisco Unified IP Phone Security Table 9-1 provides troubleshooting information for the security features on the Cisco Unified IP Phone. For information relating to the solutions for any of these issues, and for additional troubleshooting information about security, refer to Cisco Unified Communications Manager Security Guide. Table 9-1 Cisco Unified IP Phone Security Troubleshooting Problem CTL File Problems Device authentication error. Possible Cause CTL file does not have a Cisco Unified Communications Manager certificate or has an incorrect certificate. Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 9-8 OL-23092-01