Cisco CP-7975G Administration Guide - Page 73
Mounting the Phone to the Wall, Before You Begin, Procedure
View all Cisco CP-7975G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 3 Setting Up the Cisco Unified IP Phone Adjusting the Placement of the Cisco Unified IP Phone Figure 3-5 Connecting a Cable Lock to the Cisco Unified IP Phone 7971G-GE and 7970G 144477 Mounting the Phone to the Wall You can mount the Cisco Unified IP Phone on the wall by using the footstand as a mounting bracket or you can use special brackets available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be ordered separately from the phones.) If you attach the phone to a wall by using the standard footstand and not the wall mount kit, you need to supply the following tools and parts: • Screwdriver • Screws to secure the Cisco Unified IP phone to the wall See Figure 3-6 for a graphical representation of the phone parts. Before You Begin To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which the handset catches when the phone is vertical. For an illustrated procedure, refer to Installing the Wall Mount Kit for the Cisco Unified IP Phone at: http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs. Procedure Step 1 Push in the footstand adjustment button. OL-23092-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 3-13