Cisco CP-7975G Administration Guide - Page 191

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Network Configuration Table 8-1 Device Information Area Items (continued) Item UDI Time Time Zone Date LLDP: PC Port LLDP-MED: SW Port Description Displays the following Cisco Unique Device Identifier (UDI) information about the phone: • Device Type-Indicates hardware type. For example, phone displays for all phone models. • Device Description-Displays the name of the phone that is associated with the indicated model type. • Product Identifier-Specifies the phone model. • Version Identifier-Represents the hardware version of the phone. The Version Identifier field might display blank if using an older model Cisco Unified IP Phone because the hardware does not provide this information. • Serial Number-Displays the phone's unique serial number. Time obtained from the Date/Time Group in Cisco Unified Communications Manager to which the phone belongs. Timezone obtained from the Date/Time Group in Cisco Unified Communications Manager to which the phone belongs. Date obtained from the Date/Time Group in Cisco Unified Communications Manager to which the phone belongs. Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port. Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED) is enabled on the switch port. Network Configuration The Network Configuration area on a phone's web page displays network configuration information and information about other phone settings. Table 8-2 describes this information. You can view and set many of these items from the Network Configuration Menu and the Device Configuration Menu on the Cisco Unified IP Phone. For more information, see Chapter 5, Configuring Features, Templates, Services, and Users. To display the Network Configuration area, access the web page for the phone as described in the Chapter 8, Accessing the Web Page for a Phone, and then click the Network Configuration hyperlink. Table 8-2 Network Configuration Area Items Item DHCP Server BOOTP Server MAC Address Description IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone obtains its IP address. Indicates whether the phone obtains its configuration from a Bootstrap Protocol (BootP) server. Media Access Control (MAC) address of the phone. OL-23092-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5 8-5