Compaq Presario 18XL Maintenance & Service Guide Presario 1800/1800T Serie - Page 38

Preliminary Steps, Enter

Page 38 highlights

Presario 1800/1800T Series Models: XL280, XL380, XL381, and XL390 Preliminary Steps Before running POST, complete the following steps: 1. If a Power-on password is established, type the password and press the Enter key. If you do not know the password, clear the password (see Clearing the Power-On Password later in this chapter). 2. Run Compaq Diagnostics. 3. Turn off the Notebook and its external devices. 4. Disconnect any external devices you do not want to test. Note: Do not disconnect the printer if you want to test it or use it to log error messages. Important: If the problem only occurs when an external device is connected to the Notebook, the problem may be related to the external device or its cable. Verify this by running POST both with and without the external device connected. 5. Install loopback plugs in the serial and parallel connectors if you would like to test these ports. 6. Ensure that the hard drive is installed in the Notebook. 7. Ensure that the battery pack is installed and the Notebook is connected to an external AC power source. When these preliminary steps are completed, run POST. 2 TROUBLESHOOTING PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1800 SERIES

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134

2 T
ROUBLESHOOTING
P
RESARIO
N
OTEBOOK
M
AINTENANCE
AND
S
ERVICE
G
UIDE
1800 S
ERIES
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
Preliminary Steps
Before running
POST
, complete the following steps:
1.
If a Power-on password is established, type the password and press the
Enter
key. If
you do not know the password, clear the password (see
Clearing the Power-On
Password
later in this chapter).
2. Run
Compaq Diagnostics
.
3.
Turn off the Notebook and its external devices.
4.
Disconnect any external devices you do not want to test.
Note:
Do not disconnect the printer if you want to test it or use it to log error messages.
Important:
If the problem only occurs when an external device is connected to the
Notebook, the problem may be related to the external device or its cable. Verify this by
running
POST
both with and without the external device connected.
5.
Install loopback plugs in the serial and parallel connectors if you would like to test
these ports.
6.
Ensure that the hard drive is installed in the Notebook.
7.
Ensure that the battery pack is installed and the Notebook is connected to an external
AC power source.
When these preliminary steps are completed, run
POST
.