Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 50

Installing an Expansion Board, Hardware, Installation and Configuration

Get Compaq ProLiant 800 PDF manuals and user guides View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

3-13 Installing an Expansion Board To install an expansion board, such as a drive array controller or video board, refer to one of the following installation sources: s For a text and illustrated procedure, refer to the installation documentation that came with the option kit. s For a text overview of the procedure, refer to the procedure below. s For an illustrated overview of the procedure, refer to the Hardware Installation and Configuration poster included in the shipping box or to the Expansion Board Installation Label located on the inside of the small access panel. The expansion slots may be populated in any order. Slots 4, 5, and 6 are connected to the primary PCI bus. Slots 1, 2, and 3 are connected to the secondary PCI bus. 1. If the server is on, turn it off and disconnect the power cord. 2. Disconnect any other external equipment connected to the computer. 3. Remove the small access panel. 4. Press on the top – of the expansion slot latch and open the latch toward the rear — of the expansion slot cage. 5. Remove the expansion slot cover ˜. 3 1 2 Compaq ProLiant 800 Servers Supporting Pentium II Processors and 100-MHz System Bus Setup and Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
3-13
Compaq ProLiant 800 Servers Supporting Pentium II Processors and 100-MHz System Bus Setup and Installation
Guide
Installing an Expansion Board
To install an expansion board, such as a drive array controller or video board,
refer to one of the following installation sources:
■
For a text and illustrated procedure, refer to the installation
documentation that came with the option kit.
■
For a text overview of the procedure, refer to the procedure below.
■
For an illustrated overview of the procedure, refer to the
Hardware
Installation and Configuration
poster included in the shipping box or to
the Expansion Board Installation Label located on the inside of the small
access panel.
The expansion slots may be populated in any order.
Slots 4, 5, and 6
are
connected to the primary PCI bus.
Slots 1, 2, and 3 are connected to the
secondary PCI bus.
1.
If the server is on, turn it off and disconnect the power cord.
2.
Disconnect any other external equipment connected to the computer.
3.
Remove the small access panel.
4.
Press on the top
of the expansion slot latch and open the latch
toward the rear
of the expansion slot cage.
5.
Remove the expansion slot cover
.
1
2
3