Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 57
Installing Mass Storage, Devices in, the Removable Media Drive
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3-20 Overview of Installing Hardware Options Installing Mass Storage Devices in the Removable Media Drive Bays All server models ship standard with four non-hot-pluggable, removable media drive bays. The top two bays are occupied with a 3.5-inch diskette drive and an IDE CD-ROM drive; the bottom two half-height 5.25-inch bays are vacant. Two half-height removable storage devices such as tape or hard drives can be installed in the bottom two removable media drive bays. Also, one full-height storage device can be installed in the area occupied by the bottom removable media drive bays. To install a device in this area and to cable the device, refer to the installation documentation that came with the drive. Also, see Chapter 4, "SCSI Cabling Instructions for Mass Storage SCSI Devices," for SCSI cabling information. The illustrations below provide only an overview of removing the blank panel and installing a storage device. Figure 3-15. Removing blank panel timber-18.EPS