D-Link DCS-900 Product Manual - Page 24
Installing the DCS-900 Behind a Router, Identify Your Camera on the Network - ip camera
UPC - 790069262012
View all D-Link DCS-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DCS-900 Configuration (continued) Installing the DCS-900 Behind a Router 1) Identify Your Camera on the Network Once you are logged into the camera via a Web browser on your network PC,click on the Advanced Tab, and select System. Enter a unique Camera Name and Location. These settings are important if you are installing several cameras on your network. Enter a Unique camera name and location Identify Your Camera on Your Network 2) Assign a Local IP Address for Your Camera A Local IP Address is required to configure your camera and to view your camera within your local (home) network. You may use the default camera IP Address of 192.168.0.20. If you wish to use a different IP Address, be sure that the camera settings correspond to your network settings. The Default Gateway will be the IP Address of your router's Local IP Address(i.e.192.168.0.1 if you are using a DLink router) Enter a valid IP address for your camera. Assign a Local IP Address 24