D-Link DCS-900 Product Manual - Page 8
Front view, LEDS
UPC - 790069262012
View all D-Link DCS-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
LEDS LED stands for Light-Emitting Diode. Front view Power LED LAN LED Power LED The Power LED is positioned on the right side of the DCS-900 lens. Steady green confirms that the DCS-900 is powered ON. Note: There are three settings for the Power LED for monitoring purposes: Normal / Off / Dummy. Please refer to the DCS-900 Camera Configuration section for detailed information and usage. LAN LED The LAN LED is positioned on the right side of the DCS-900's lens. It is located below the Power LED. Steady orange confirms a good connection to the LAN. Depending on the data traffic, the LED will begin to flash to indicate that the DCS-900 is receiving/transceiving from/to the LAN network. 8
8
LEDS
LED
stands for
L
ight-
E
mitting
D
iode.
Power LED
The Power LED is positioned on the right side of the DCS-900 lens. Steady green confirms
that the DCS-900 is powered
ON
.
Note:
There are three settings for the Power LED for monitoring purposes:
Normal / Off /
Dummy.
Please refer to the
DCS-900 Camera Configuration
section for detailed
information and usage
.
LAN LED
The LAN LED is positioned on the right side of the DCS-900’s lens. It is located below
the Power LED.
Steady orange confirms a good connection to the LAN.
Depending on the data traffic, the LED will begin to flash to indicate that the DCS-900
is
receiving/transceiving from/to the LAN network.
Front view
Power LED
LAN LED