D-Link DES-3010FA-TAA CLI Guide - Page 115
IP Addressing Commands, ip address
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
IP Addressing Commands Section 9. IP Addressing Commands ip address The ip address Interface Configuration (Ethernet, VLAN, port-channel) mode command sets an IP address. To remove an IP address, use the no form of this command. Syntax ip address ip-address {mask | prefix-length} no ip address [ip-address] Parameters • ip-address -Valid IP address • mask - Valid network mask of the IP address. • prefix-length - Specifies the number of bits that comprise the IP address prefix. The prefix length must be preceded by a forward slash (/). (Range: 8 -30) Default Configuration No IP address is defined for interfaces. Command Mode Interface Configuration (Ethernet, VLAN, port-channel) mode User Guidelines An IP address cannot be configured for a range of interfaces (range context). Example The following example configures VLAN 1 with IP address 131.108.1.27 and subnet mask 255.255.255.0. Console(config)# interface vlan 1 Console(config-if)# ip address 131.108.1.27 255.255.255.0 Page 114