D-Link DES-3010FA-TAA CLI Guide - Page 96
port storm-control broadcast rate
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
D-Link DES-3010FA/GA CLI Reference Guide port storm-control broadcast rate The port storm-control broadcast rate Interface Configuration (Ethernet) mode command configures the maximum broadcast rate. To return to the default configuration, use the no form of this command. Syntax port storm-control broadcast rate rate no port storm-control broadcast rate Parameters • rate - Maximum kilobits per second of broadcast and multicast traffic on a port Possible values are: - 70K - 1M in steps of at least 10K - 1M-10M in steps of at least 1M - 10M-250M in steps based on the requested rate Default Configuration The default storm control broadcast rate is 100 Kbits/Sec. Command Mode Interface Configuration (Ethernet) mode User Guidelines Use the port storm-control broadcast enable Interface Configuration mode command to enable broadcast storm control. Since granularity depends on the requested rate, the software displays the actual rate. Example The following example configures the maximum storm control broadcast rate at 900 Kbits/Sec on Ethernet port 5. Console(config)# interface ethernet 5 Console(config-if)# port storm-control broadcast rate 900 Page 95