D-Link DES-3010FA-TAA CLI Guide - Page 99
gvrp enable (Interface), GVRP Commands, Syntax, Default Configuration, Command Mode, User Guidelines
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
GVRP Commands gvrp enable (Interface) The gvrp enable Interface Configuration (Ethernet, port-channel) mode command enables GVRP on an interface. To disable GVRP on an interface, use the no form of this command. Syntax gvrp enable no gvrp enable Default Configuration GVRP is disabled on all interfaces. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines An access port does not dynamically join a VLAN because it is always a member in only one VLAN. Membership in an untagged VLAN is propagated in the same way as in a tagged VLAN. That is, the PVID is manually defined as the untagged VLAN VID. Example The following example enables GVRP on Ethernet port 6. Console(config)# interface ethernet 6 Console(config-if)# gvrp enable Page 98