D-Link DES-3010FA-TAA CLI Guide - Page 94
port storm-control include-multicast, port storm-control include-multicast [unknown-unicast]
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
D-Link DES-3010FA/GA CLI Reference Guide port storm-control include-multicast The port storm-control include-multicast Interface Configuration (Ethernet) mode command counts multicast packets in broadcast storm control. To disable counting multicast packets, use the no form of this command. Syntax port storm-control include-multicast [unknown-unicast] no port storm-control include-multicast Parameters • unknown-unicast - Specifies also counting unknown unicast packets. Default Configuration Multicast packets are not counted. Command Modes Interface Configuration (Ethernet) mode User Guidelines To control multicasts storms, use the port storm-control broadcast enable and port storm-control broadcast rate commands. Example The following example enables counting broadcast and multicast packets on Ethernet port 3. Console(config)# interface ethernet 3 Console(config-if)# port storm-control include-multicast Page 93