D-Link DES-3010FA-TAA CLI Guide - Page 294
private-vlan community, remove, interface range vlan
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
D-Link DES-3010FA/GA CLI Reference Guide private-vlan community The private-vlan community Interface Configuration mode command associates the primary VLAN with the community VLANs. Syntax private-vlan community {add community-vlan-list | remove community-vlan-list } • add community-vlan-list - Specifies a list of community VLAN IDs to be associated. Separate nonconsecu- tive VLAN IDs with a comma and no spaces; a hyphen designates a range of IDs. • remove community-vlan-list - Specifies a list of community VLAN IDs to be removed. Separate noncon- secutive VLAN IDs with a comma and no spaces; a hyphen designates a range of IDs. Default Configuration No association is configured. Command Mode Interface Configuration (VLAN) mode User Guidelines • This command creates a community VLAN and associates it with the primary VLAN. • The command is executed in the context of the primary VLAN. • A community VLAN can only be associated with one primary VLAN. • A VLAN that has been configured as a community VLAN cannot be configured as a primary or isolated VLAN. • The command is not supported under the command interface range vlan. Example This example associates primary private VLAN 200 with community private VLAN 2. Console# config Console(config)# vlan database Console(config-vlan)# vlan 200 Console(config-vlan)# exit Console(config)# interface vlan 200 Console(config-if)# private-vlan community add 2 Page 293