D-Link DES-3010FA-TAA CLI Guide - Page 33
bridge multicast forbidden address, Address Table Commands, Syntax, Parameters, Default Configuration
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Address Table Commands bridge multicast forbidden address The bridge multicast forbidden address Interface Configuration (VLAN) mode command forbids adding a specific multicast address to specific ports. Use the no form of this command to return to the default configuration. Syntax bridge multicast forbidden address {mac-multicast-address | ip-multicast-address} {add | remove} {ethernet interface-list | port-channel port-channel-number-list} no bridge multicast forbidden address {mac-multicast-address | ip-multicast-address} Parameters • add - Adds ports to the group. • remove - Removes ports from the group. • mac-multicast-address - A valid MAC multicast address. • ip- multicast-address - A valid IP multicast address. • interface-list - Separate nonconsecutive Ethernet ports with a comma and no spaces; hyphen is used to designate a range of ports. • port-channel-number-list - Separate nonconsecutive valid port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels. Default Configuration No forbidden addresses are defined. Command Modes Interface Configuration (VLAN) mode User Guidelines Before defining forbidden ports, the multicast group should be registered. Examples In this example, MAC address 0100.5e02.0203 is forbidden on port 7 within VLAN 8. Console(config)# interface vlan 8 Console(config-if)# bridge multicast address 0100.5e.02.0203 Console(config-if)# bridge multicast forbidden address 0100.5e02.0203 add ethernet 7 Page 32