D-Link DES-3010FA-TAA CLI Guide - Page 209
snmp-server v3-host, no snmp-server host
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
SNMP Commands snmp-server v3-host The snmp-server v3-host Global Configuration mode command specifies the recipient of Simple Network Management Protocol Version 3 notifications. To remove the specified host, use the no form of this command. Syntax snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth | priv} [udp-port port] [filter filtername] [timeout seconds] [retries retries] no snmp-server host {ip-address | hostname} username [traps | informs] Parameters • ip-address-Specifies the IP address of the host (targeted recipient). • hostname-Specifies the name of the host. (Range:1-158 characters) • username-Specifies the name of the user to use to generate the notification. (Range: 1-25) • traps-Indicates that SNMP traps are sent to this host. • informs-Indicates that SNMP informs are sent to this host. • noauth-Indicates no authentication of a packet. • auth-Indicates authentication of a packet without encrypting it. • priv-Indicates authentication of a packet with encryption. • port-Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162. (Range: 1-65535) • filtername-Specifies a string that defines the filter for this host. If unspecified, nothing is filtered. (Range: 1-30 characters) • seconds-Specifies the number of seconds to wait for an acknowledgment before resending informs. If unspecified, the default timeout period is 15 seconds. (Range: 1-300) • retries-Specifies the maximum number of times to resend an inform request. If unspecified, the default max- imum number of retries is 3. (Range: 1-255) Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines A user and notification view are not automatically created. Use the snmp-server user, snmp-server group and snmp-server view Global Configuration mode commands to generate a user, group and notify group, respectively. Example The following example configures an SNMPv3 host. Console(config)# snmp-server v3-host 192.168.0.20 john noauth Page 208