D-Link DES-3010FA-TAA CLI Guide - Page 20

aaa authentication enable, D-Link DES-3010FA/GA CLI Reference Guide, Syntax, Parameters

Page 20 highlights

D-Link DES-3010FA/GA CLI Reference Guide aaa authentication enable The aaa authentication enable Global Configuration mode command defines authentication method lists for accessing higher privilege levels. To return to the default configuration, use the no form of this command. Syntax aaa authentication enable {default | list-name} method1 [method2...] no aaa authentication enable {default | list-name} Parameters • default - Uses the listed authentication methods that follow this argument as the default list of methods, when using higher privilege levels. • list-name - Character string used to name the list of authentication methods activated, when using access higher privilege levels (Range: 1-12 characters). • method1 [method2...] - Specify at least one from the following table: Keyword enable line none radius Description Uses the enable password for authentication. Uses the line password for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses username $enabx$., where x is the privilege level. Default Configuration If the default list is not set, only the enable password is checked. This has the same effect as the command aaa authentication enable default enable. On the console, the enable password is used if it exists. If no password is set, the process still succeeds. This has the same effect as using the command aaa authentication enable default enable none. Command Mode Global Configuration mode User Guidelines The default and optional list names created with the aaa authentication enable command are used with the enable authentication command. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. All aaa authentication enable default requests sent by the device to a RADIUS server include the username $enabx$., where x is the requested privilege level. Page 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348

D-Link DES-3010FA/GA CLI Reference Guide
Page 19
aaa authentication enable
The
aaa
authentication enable
Global Configuration mode command defines authentication method lists for
accessing higher privilege levels. To return to the default configuration, use the
no
form of this command.
Syntax
aaa authentication enable
{
default
|
list-name
}
method1
[
method2
...]
no aaa authentication enable
{
default
|
list-name
}
Parameters
default
— Uses the listed authentication methods that follow this argument as the default list of methods,
when using higher privilege levels.
list-name
— Character string used to name the list of authentication methods activated, when using access
higher privilege levels (Range: 1-12 characters).
method1
[
method2
...] — Specify at least one from the following table:
Default Configuration
If the
default
list is not set, only the enable password is checked. This has the same effect as the command
aaa
authentication enable
default enable
.
On the console, the enable password is used if it exists. If no password is set, the process still succeeds. This has
the same effect as using the command
aaa authentication enable
default enable none
.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the
aaa authentication enable
command are used with the
enable authentication
command.
The additional methods of authentication are used only if the previous method returns an error, not if it fails. To
ensure that the authentication succeeds even if all methods return an error, specify
none
as the final method in
the command line.
All
aaa authentication enable
default
requests sent by the device to a RADIUS server include the username
$enabx$., where x is the requested privilege level.
Keyword
Description
enable
Uses the enable password for authentication.
line
Uses the line password for authentication.
none
Uses no authentication.
radius
Uses the list of all RADIUS servers for authentication. Uses username $enabx$.,
where x is the privilege level.