D-Link DES-3010FA-TAA CLI Guide - Page 306
switchport protected, Syntax, Default Configuration, Command Mode, User Guidelines, Example
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
D-Link DES-3010FA/GA CLI Reference Guide switchport protected The switchport protected Interface Configuration mode command overrides the FDB decision and sends all Unicast, Multicast and Broadcast traffic to an uplink port. To return to the default configuration, use the no form of the command . Syntax switchport protected {ethernet interface | port-channel port-channel-number } no switchport protected • interface - Specifies the uplink Ethernet port. • port-channel-number- Specifies the port-channel uplink port. Default Configuration Overriding the FDB decision is disabled. Command Mode Interface Configuration (Ethernet, port-channel) User Guidelines • Packets to the MAC address of the device are sent to the device and not forwarded to the uplink. Example The following example overrides the FDB decision and sends all Unicast, Multicast and Broadcast traffic to Ethernet port 7 from protected Ethernet port 8. Console# config Console(config)# interface ethernet 7 Console(config-if)# switchport protected ethernet 8 Page 305