D-Link DES-3010FA-TAA CLI Guide - Page 31
bridge multicast filtering, bridge multicast forward-all - switch
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Address Table Commands bridge multicast filtering The bridge multicast filtering Global Configuration mode command enables filtering multicast addresses. To disable filtering multicast addresses, use the no form of this command. Syntax bridge multicast filtering no bridge multicast filtering Default Configuration Filtering multicast addresses is disabled. All multicast addresses are flooded to all ports. Command Mode Global Configuration mode User Guidelines If multicast routers exist on the VLAN, do not change the unregistered multicast addresses state to drop on the switch ports. If multicast routers exist on the VLAN and IGMP-snooping is not enabled, the bridge multicast forward-all command should be used to enable forwarding all multicast packets to the multicast switches. Example In this example, bridge multicast filtering is enabled. Console(config)# bridge multicast filtering Page 30