D-Link DES-3010FA-TAA CLI Guide - Page 66

D-Link DES-3010FA/GA CLI Reference Guide Section 5. Configuration and Image Files copy The copy Privileged EXEC mode command copies files from a source to a destination. Syntax copy source-url destination-url Parameters • source-url - The source file location URL or reserved keyword of the source file to be copied. (Range: 1-160 characters) • destination-url - The destination file URL or reserved keyword of the destination file. (Range: 1-160 characters) The following table displays keywords and URL prefixes: Keyword flash: running-config startup-config image boot tftp:// xmodem: null: Source or Destination Source or destination URL for flash memory. It's the default in case a URL is specified without a prefix. Represents the current running configuration file. Represents the startup configuration file. If the source file, represents the active image file. If the destination file, represents the non-active image file. Boot file. Source or destination URL for a TFTP network server. The syntax for this alias is tftp:// host/[directory]/filename. The host can be represented by its IP address or hostname. Source for the file from a serial connection that uses the Xmodem protocol. Null destination for copies or files. A remote file can be copied to null to determine its size. Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines Up to five backup configuration files are supported on the device. The location of a file system dictates the format of the source or destination URL. The entire copying process may take several minutes and differs from protocol to protocol and from network to network. Understanding Invalid Combinations of Source and Destination Page 65