D-Link DES-3010FA-TAA CLI Guide - Page 295
switchport mode, trunk | general
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
VLAN Commands switchport mode The switchport mode Interface Configuration mode command configures the VLAN membership mode of a port. To return to the default configuration, use the no form of this command. Syntax switchport mode {access | trunk | general} switchport mode private-vlan {promiscuous | community | isolated} no switchport mode • access - Indicates an untagged layer 2 VLAN port. • trunk - Indicates a trunking layer 2 VLAN port. • general - Indicates a full 802-1q supported VLAN port. • promiscuous - Indicates a promiscuous private-vlan port. • community - Indicates a community private-vlan port. • isolated - Indicates an isolated private-vlan port. Default Configuration All ports are in access mode, and belong to the default VLAN (whose VID=1). Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines • A port cannot be defined as promiscuous or isolated if it is a member of a VLAN. • If a port is defined as promiscuous or isolated, it is no longer a member of the default VLAN. Example The following example configures Ethernet port 3 as an untagged layer 2 VLAN port. Console(config)# interface ethernet 3 Console(config-if)# switchport mode access Page 294