D-Link DES-3010FA-TAA CLI Guide - Page 146
deny (Management), ethernet, port-channel, deny ip-source
UPC - 790069296505
View all D-Link DES-3010FA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
D-Link DES-3010FA/GA CLI Reference Guide deny (Management) The deny Management Access-List Configuration mode command defines a deny rule. Syntax deny [ethernet interface-number | vlan vlan-id | port-channel port-channel-number] deny ip-source ip-address [mask mask | prefix-length] [ethernet interface-number | vlan vlan-id | port-channel port-channel-number] Parameters • interface-number - A valid Ethernet port number. • vlan-id - A valid VLAN number. • port-channel-number - A valid port-channel number. • ip-address - A valid source IP address. • mask - A valid network mask of the source IP address. • mask prefix-length - Specifies the number of bits that comprise the source IP address prefix. The prefix length must be preceded by a forward slash (/). (Range: 0-32) Default Configuration This command has no default configuration. Command Mode Management Access-list Configuration mode User Guidelines Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is defined on the appropriate interface. The system supports up to 128 management access rules. Example The following example denies all ports in the access list called mlist. Console(config)# management access-list mlist Console(config-macl)# deny Page 145