D-Link DES-3226 Reference Manual - Page 132

DES-3226S Layer 2 Fast Ethernet Switch User's Guide create ipfilter Purpose Used to enter an IP address that will be filtered from the switch. Syntax create ipfilter [src/dst/either] Description The command allows you to select an IP address to be filtered from the switch. This IP address can be specified as the source of packets, the destination of packets, or either (both). Parameters − The IP address that is to be filtered from the switch. src − Specifies the above IP address as the source of packets. Packets with the above IP address as their source will be dropped when they are received by the switch. dst − Specifies the above IP address as the destination of packets. Packets with the above IP address as their destination will be dropped when they are received by the switch either − Specifies the above IP address as both the destination of packets and the source. Packets with the above IP address as their destination or their source will be dropped when they are received by the switch Restrictions Only administrator-level users can issue this command. 132 IP Filtering Commands